88192278-01-19 Installation Master - 第137页
PRINTER PREPARATION PRINTER ASSEMBLY Chapter Issue 15, May 20 Installation Manual 4.35 12. C onnect the following cables to t he monitor: • Monitor Power Cable (DC) •V G A C a b l e • T ouchscreen Cable (USB) 13. C onnec…
PRINTER PREPARATION
PRINTER ASSEMBLY
4.34 Installation Manual Chapter Issue 15, May 20
located in the key slots.
11. Secure the monitor using the monitor securing screw.
Monitor Fixing Bracket
Monitor Securing Screw
PRINTER PREPARATION
PRINTER ASSEMBLY
Chapter Issue 15, May 20 Installation Manual 4.35
12. Connect the following cables to the monitor:
• Monitor Power Cable (DC)
•VGA Cable
• Touchscreen Cable (USB)
13. Connect the Rear Monitor USB Connector cable to the remaining USB cable
coming from the printer.
14. Locate the free floating USB connector inside the right hand side of the
printer, behind the front panel.
15. Connect the keyboard.
16. Refit the front panel.
Type 2 Covers Use the following procedure to fit the monitor:
1. Remove the front panel.
2. Using a 13mm spanner, fit the monitor arm to the printer frame.
Securing Bolts
PRINTER PREPARATION
PRINTER ASSEMBLY
4.36 Installation Manual Chapter Issue 15, May 20
3. Locate the following cables stowed within the printer:
• Monitor Power Cable
•VGA Cable
• Touchscreen Cable (USB)
• USB Cable - Rear Monitor USB Connector
4. Feed the cables outside the printer
5. Remove the monitor bracket shaft cap using a 2mm Allen key.
6. Fit the monitor bracket on to the monitor bracket shaft and lock the release
catch.
7. Refit the cap.
8. Fit the monitor to the monitor fixing bracket ensuring that all four studs are
located in the key slots.
Securing Screw
Monitor Bracket Shaft
Cap
Monitor Fixing Bracket
Monitor Securing Screw