88192278-01-19 Installation Master - 第89页

COVERS PRINTER COVERS Chapter Issue 12, Feb 18 Installation Manual 2.55 Rear Panel Labels The rear cover has five labels (one is a general safety label and not detailed here). T he labels are used to inform users of prin…

COVERS

PRINTER COVERS

2.54 Installation Manual Chapter Issue 12, Feb 18

The glass printhead cover is replaced with an aluminium cover with a conduc-

tive Perspex window, fitted with a conductive seal.

Figure 6-4 Printhead Cover

NOTE

For the Electrostatic Protected Area to work effectively, all panels must be fitted

correctly and the printhead cover closed.

Aluminium Cover

Cover Contact Pads

Conductive Perspex Window

Conductive Seal

Studs

(under front cover on upper side panels)

COVERS

PRINTER COVERS

Chapter Issue 12, Feb 18 Installation Manual 2.55

Rear Panel Labels The rear cover has five labels (one is a general safety label and not detailed

here). The labels are used to inform users of printer safety, delivery status and

environmental condition.

Fifth Leg This label warns the user to retract the fifth leg after the printer has been

levelled.

Environmental -

Substance Release

This label complies with RoHS (China) legislation. It indicates that hazardous

substances, present in the printer, are not released for at least an industry

agreed time period. The number (15) within the symbol indicates the number of

years before the substance may be released.

In the DEK printer, the items listed in the RoHS certificates SJ/T11363-2006

supplied with the printer, contain lead.

Printer Conformity This label gives the following information:

• Model Designation

• Machine Serial Number

• Machine Sales Order Number

• Machine Type

• Nominal Voltage

• Full Load Current Rating

• Frequency

• Number of Electrical Phases

• Pressure Range

• Year of Manufacture

• Date of Refurbishment

• Short Circuit Current

COVERS

PRINTER COVERS

2.56 Installation Manual Chapter Issue 12, Feb 18

• ASM Contact Address

• Country of Manufacture

The following technical information is used to specify the electrical and pneu-

matic supplies to the printer.

• Nominal Voltage

• Full Load Current Rating

• Frequency

• Number of Electrical Phases Required

• Minimum and Maximum Compressed Air Pressures (in Bar)

Next Service Due This label is filled in by the engineer at installation to show when the next service

is due. On subsequent service visits the engineer replaces the label.