88192278-01-19 Installation Master - 第93页
SERVICES REQUIRED PRINTER FOOTPRINTS Chapter Issue 16, Nov 19 Installation Manual 3.3 PRINTER FOOTPRINTS Figure 3-1 T ype 1 Covers
SERVICES REQUIRED
PRINTER SUPPLIES AND ENVIRONMENTAL CONDITIONS
3.2 Installation Manual Chapter Issue 16, Nov 19
And as described in the IPC Standard J-STD-001G-Requirements for Soldered
Electrical and Electronic Assemblies Section 4 with respect to the following:
• Facilities - Cleanliness and ambient environments in all work areas be
maintained at levels that prevent contamination or deterioration of tools,
materials, and surfaces to be soldered or conformally coated. Eating,
drinking, smoking, including use of e-cigarettes, and/or use of tobacco
products be prohibited in the work area.
• Environmental Controls - The soldering facility (controlled work area) be
enclosed, temperature and humidity controlled, and maintained at a posi-
tive pressure.
• Controlled Work Area (CWA) For the purpose of this statement, a Con-
trolled Work Area (CWA) is defined as an enclosed assembly / processing
area maintained to a high degree of shop cleanliness, environmental
control, and foreign object debris (FOD) mitigation, either by process or
procedure, to limit the entry of contamination.
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.
This equipment should be installed in accordance with the Installation Manual.
ASM absolves itself of all responsibility if the machine is not used within its
operating envelope or for its intended purpose.
SERVICES REQUIRED
PRINTER FOOTPRINTS
Chapter Issue 16, Nov 19 Installation Manual 3.3
PRINTER FOOTPRINTS
Figure 3-1 Type 1 Covers
SERVICES REQUIRED
PRINTER FOOTPRINTS
3.4 Installation Manual Chapter Issue 16, Nov 19
Figure 3-2 Type 1 Covers (with HTC)