YS24X_Mainte_E - 第129页
5-3 5 Lubrication points and schedule 2.2 Y -axis Y -axis lubrication points Y -axis guide Grease nipple Grease gun: Manual lubrication: 53502-L4-00 Lubrication section Lubrication point Interval Procedure Guide 8 Once e…
5-2
5
Lubrication points and schedule
2.
Lubrication points and schedule (Main machine)
2.1 X-axis
X-axis lubrication points
Guide and ball screw
Grease gun:
Manual lubrication:
X-axis guide
Grease nipple (small) 2 places
X-axis guide
Grease nipple (large) 2 places
X-axis ball screw
Grease nipple (large) 1 place
53501-L4-00
Lubrication section Lubrication point Interval Procedure
Guide (right side) 2 (each table)
Once every
2 months
Grease gun: Standard nozzle(ø10mm)
Guide (left side) 2 (each table) Grease gun: Bend type nozzle(ø5mm)
Ball screw 1 (each table) Grease gun: Standard nozzle(ø10mm)
5-3
5
Lubrication points and schedule
2.2 Y-axis
Y-axis lubrication points
Y-axis guide
Grease nipple
Grease gun:
Manual lubrication:
53502-L4-00
Lubrication section Lubrication point Interval Procedure
Guide 8
Once every
2 months
Grease gun: Standard nozzle(ø10mm)
5-4
5
Lubrication points and schedule
2.3 W-axis (U-axis)
2.3.1 Dual-stage specifications
W- and U-axis lubrication points
Dual-stage
W1-axis ball screw
W1-axis ball screw
W3-axis hexagon spline
W3-axis ball screw
W1-axis hexagon spline
W1-axis guide
W1-axis guide
W3-axis guide
W3-axis ball screw
W2-axis ball screw
W2-axis hexagon spline
W2-axis guide
W1-axis (stage 1), W3-axis (exit conveyor) lubrication points
W2 / U-axis (stage 2) lubrication points
W2-axis ball screw
W2-axis guide
Grease gun:
Manual lubrication:
53503-L4-10
Lubrication section Lubrication point Interval Procedure
W1-axis, W3-axis ball screw 4 Once every 6 months Manual lubrication
W1-axis, W3-axis guide 3 Once every 6 months Manual lubrication
W1-axis, W3-axis hexagon splines 2 Once every 6 months Manual lubrication
W2-axis (U-axis) ball screw 2 Once every 3 moths Manual lubrication
W2-axis (U-axis) guide 2 Once every 3 moths Manual lubrication
W2-axis (U-axis) hexagon splines 1 Once every 3 moths Manual lubrication