YS24X_Mainte_E - 第134页
5-8 5 Lubrication points and schedule 2.4.3. Single-lane specifications PU-axis lubrication points Single-lane Grease gun: Manual lubrication: Ball screw Ball screw Ball screw 53509-L4-00 Lubrication section Lubrication …
5-7
5
Lubrication points and schedule
2.4 PU-axis
2.4.1 Dual-stage specifications
PU-axis lubrication points
Dual-stage
Ball screw
Grease gun:
Manual lubrication:
Stage 1 Stage 2
Ball screw
Ball screw
Ball screw
Ball screw
Ball screw
53505-L4-10
Lubrication section Lubrication point Interval Procedure
Ball screw 3 (each stage) Once every 2 months Manual lubrication
2.4.2 Dual-lane specifications
PU-axis lubrication points
Dual-lane
Lane 1
Lane 2
Grease gun:
Manual lubrication:
Ball screw
Ball screw
Ball screw
Ball screw
Ball screw
Ball screw
53506-L4-10
Lubrication section Lubrication point Interval Procedure
Ball screw 3 (each stage) Once every 2 months Manual lubrication
5-8
5
Lubrication points and schedule
2.4.3. Single-lane specifications
PU-axis lubrication points
Single-lane
Grease gun:
Manual lubrication:
Ball screw
Ball screw
Ball screw
53509-L4-00
Lubrication section Lubrication point Interval Procedure
Ball screw 3 Once every 2 months Manual lubrication
5-9
5
Lubrication points and schedule
2.5 Z-axis (Spline shaft)
n
NOTE
Basically, the lubricating the spline shaft (Z-axis) is not required. However, the grease on the spline shaft surface is
removed by touching with hand or by sprinkling solvent. As a result, the spline shaft gets easily rusted. Apply the
specified grease (NSL) slightly for anti-rusting as needed.
Z-axis lubrication points
Z-axis spline shaft
Grease gun:
Manual lubrication:
53507-L4-10
Lubrication section Lubrication point Interval Procedure
Z-axis spline shaft 10 (each table) 3 months Manual lubrication (thin coat)