YS24X_Mainte_E - 第29页
xxvi Safety instructions Potential hazard Could cause machine damage (collisions with head, etc.). T o avoid hazard V erify that no objects have been placed on the top cover of the feeder exchange carriage (for YSM40). A…
xxv
Safety instructions
Potential
hazard
Machine damage
To avoid
hazard
If machine is not to be used for 6 months or more, block off the solvent path to protect solvent
pump.
Applicable
machines
All solder paste printers
Case
Maintenance
Potential
hazard
Might disable machine functions
To avoid
hazard
Periodically replace USP battery since it has a limited service life.
Applicable
machines
Machines equipped with UPS (option)
Case
Maintenance
Potential
hazard
Machine damage
To avoid
hazard
Read manuals and use correct procedure to operate machine.
Applicable
machines
YS24X (machines equipped with sATS II)
Case
All case
xxvi
Safety instructions
Potential
hazard
Could cause machine damage (collisions with head, etc.).
To avoid
hazard
Verify that no objects have been placed on the top cover of the feeder exchange carriage (for
YSM40).
Applicable
machines
Feeder exchange carriage (YSM40)
Case
Setup
Potential
hazard
The carrier tape could make contact with the head, possibly causing machine damage.
To avoid
hazard
When a feeder is extracted from its loaded position, be sure that the feeder has been completely
extracted before pressing it back into its loaded position.
Applicable
machines
Z:LEX(YSM20/YSM20W), YSM40/YSM40R
Case
Setup
Potential
hazard
Pallet may drop if setting up components on the component supply station.
To avoid
hazard
Remove pallets before setting up components.
Applicable
machines
cATS (YSM40/YSM40R)
Case
Setup
xxvii
Safety instructions
Potential
hazard
Could cause machine damage (collisions with head, etc.).
To avoid
hazard
Verify that no objects have been placed on the top cover of the feeder exchange carriage (for
YSM40 and Z:LEX (YSM20
))
.
Applicable
machines
Feeder exchange carriage
(YSM40/YSM40R, Z:LEX(YSM20/YSM20W))
Case
Setup
Potential
hazard
Could cause machine damage (collisions with head, etc.).
To avoid
hazard
Verify that no objects have been placed on the top cover of the feeder exchange carriage (for YSM40
and Z:LEX (YSM20)).
Applicable
machines
Feeder exchange carriage
(YSM40/YSM40R, Z:LEX(YSM20/YSM20W))
Case
Setup
Potential
hazard
Machine damage
To avoid
hazard
Do not insert or remove any connector while power is on.
Applicable
machines
cATS10 (Z:LEX(YSM20/YSM20W) )
Case
Setup