YS24X_Mainte_E - 第32页

xxix Safety instructions n Label positions W arning/caution labels Front 2 ■ X axis frame section inner side (front and rear sides) ■ Feeder setup section (2 locations each on front and rear sides) ■ Right and left sides…

xxviii

Safety instructions

3.4 Label positions

The following warning/caution labels are attached to the YAMAHA products to ensure safe and correct use.

Check that the information on each label is clearly legible and comply with the instructions.

For safety precautions other than those on the labels shown in this section, see the instructions in "1. Safety".

NOTE

Basically, labels are attached to the positions shown below, although they may differ slightly depending on the

machine model.

NOTE

When connecting power to this equipment, refer to "Power connection terminals" described in the appendix of the

maintenance manual or user's manual.

Warning/caution labels

Front 1

■ Open/close cover (front and rear sides)

■ Open/close cover inner side

(front and rear sides)

■ Open/close cover

(front and rear sides)

■ Main switch

■ Cutter inner side

■ Cutter section

■ Conveyor opening

(front and rear sides, right and

left sides)

93201-L4-10

xxix

Safety instructions

Label positions

Warning/caution labels

Front 2

■ X axis frame section inner side (front and rear sides)

■ Feeder setup section

(2 locations each on front and rear sides)

■ Right and left sides

■ Lower panels

(front and rear sides)

■ Panel inner side

93202-L4-10

xxx

Safety instructions

Label positions

Warning/caution labels

Rear (YS24X+sATSII)

■ Open/close cover

■ Cutter section

■ Cutter inner side

93203-L4-10