00191457-02 - 第30页
SIEMENS AG 2006 All rights reserved Technische Änderungen vorbehalten Artikel-Nr.: 00191457-02 Siemens Aktiengesellscha ft Bestellung an: SIEMENS AG, Auto mation&Drives Electronics Assembly Rupert-Mayer-Strasse 44 D-…
Retrofit instructions Nozzle changer SIPLACE HS-50 / HS-60 / D4
06/2006 Edition
28
2.12 Installing the 2nd nozzle changer
Fig. 2 - 3 shows the locations for installing the first and second nozzle changer for each gantry .2
: Detach the plug from the y-adapter on the blue compressed air line.
: Before installation, position the nozzle changer (item 1 to 4 in Fig. 2 - 1) so that the opening for
the electrical and pneumatic connections at the bottom (item A in Fig. 2 - 1) is pointing in the
direction shown in Fig. 2 - 1.
: Plug the control cable (item 9 in Fig. 2 - 3 into the control board and secure in place with the
two screws.
The assignment of control cables to nozzle changers is shown in table 2 - 1.
: Make sure that the contact surface (item 8 in Fig. 2 - 3) for the nozzle changer on the used tape
guide channel is clean.
: Place the nozzle changer (item 5 in Fig. 2 - 3) on the used tape guide channel (item 1 in Fig.
2 - 3) at the point indicated by with item 8 in Fig. 2 - 3.
: Start by loosely tightening the four M4 x 16 hexagon socket-head screws (item 6 in Fig. 2 - 3).
: Then fully tighten the four M4 x 16 hexagon socket-head screws in a diagonally opposite se-
quence.
: Attach the blue compressed air hose of the nozzle changer to the y-adapter.
: Check the connectors of the CAN I/O module 3 in sector distributor 1 (see section 2.9.
: Make the settings described in section 2.10.
: Commissioning the nozzle changer (see section 2.11).
2
2
2
2
2
SIEMENS AG 2006 All rights reserved Technische Änderungen vorbehalten
Artikel-Nr.: 00191457-02 Siemens Aktiengesellschaft
Bestellung an:
SIEMENS AG, Automation&Drives
Electronics Assembly
Rupert-Mayer-Strasse 44
D-81359 Muenchen
Printed by SIEMENS
SIEMENS AG 2006 All rights reserved Subject to change without prior notice
Order no.: 00191457-02 Siemens Aktiengesellschaft
To be ordered from:
SIEMENS AG, Automation&Drives
Electronics Assembly
Rupert-Mayer-Strasse 44
D-81359 Muenchen
Printed by SIEMENS