Micron Technical Reference V9 Volume 1 - 第12页
INTRODUCTION DOCUMENTATION 1.2 Technical Reference Manual Chapter Issue 12, Feb 18 Electronic DVD The following information is provided on DVD: • Instruction Guide (in all available languages) • Installation Manual • T e…
INTRODUCTION
DOCUMENTATION
Chapter Issue 12, Feb 18 Technical Reference Manual 1.1
CHAPTER 1 INTRODUCTION
DOCUMENTATION
Description DEK Stencil printing machines are fully supported by a comprehensive range of
technical documentation, both electronically and in hard copy. The electronic
documentation is supplied on CD-ROMs and the printer PC hard disk.
The information contained within the documentation enables an ASM service
engineer or ASM trained technician to install, calibrate, service and fault find
DEK printing machines safely and efficiently. A user-friendly operating guide
allows ASM trained operatives to utilize the printer functions.
The documentation supplied with the printer is disseminated into the following
structures:
Printer Models The above documentation structures support following printer models:
• Horizon
• Galaxy
• Gemini
• Europa
• NeoHorizon
• E By DEK
Instruction Guide This is the master document of the printer docu-
mentation set. This guide meets all the applicable
machine instruction requirements contained in
the Machinery Directive 2006/42/EC. In its role as
a master document it guides the user to other
machine documentation where more detailed
information is available.
Technical Reference Manual Provides detailed information on the printers
modules, sub assemblies and calibrations.
Maintenance Manual Provides detailed information on the printer
monthly maintenance schedule.
Installation Manual Enabling ASM authorized personnel to install the
printer to a customer site. Detailing printer prepa-
ration, installation instructions, alignment proce-
dures and printer performance check.
Operator Manual Printer user guide allowing a ASM trained opera-
tive to employ the printer functions.
Electrical Drawings Contains electrical circuit diagrams for fault diag-
nosis.
Printer Tutorials Animations available from the help menu to assist
the operator in printer functions such as: safety,
navigation, printer preparation, product change-
over and setup product.
Consumable Replenishments Animations available from the help menu to assist
the operator in replenishing the consumables for:
understencil cleaners, paste dispenser and Pro-
Flow.
INTRODUCTION
DOCUMENTATION
1.2 Technical Reference Manual Chapter Issue 12, Feb 18
Electronic
DVD The following information is provided on DVD:
• Instruction Guide (in all available languages)
• Installation Manual
• Technical Reference Manual
• Operator Manual (in all available languages)
• Electrical Drawings
• Machine Tutorials
• Consumable Replenishment Tutorials
Hard Disk The following information is provided on the printer PC hard disk:
• Instruction Guide (in all available languages)
• Installation Manual
• Technical Reference Manual
• Operator Manual (in all available languages)
• Printer Tutorials
• Consumable Replenishment Tutorials
Hard Copy The following documentation is included in hard copy format with the printer:
• Instruction Guide (in all available languages)
• Installation Manual
• Operator Manual (in language specified by customer)
• Electrical Drawings (A3 format)
INTRODUCTION
MANUAL STRUCTURE
Chapter Issue 12, Feb 18 Technical Reference Manual 1.3
MANUAL STRUCTURE
The Technical Reference Manual is composed around four defined areas:
• Manual Introduction and Overview
• Printer Electrical and Electronics Areas
• Printer Modules
• Miscellaneous Information
Based upon the areas above, the manual is divided into chapters. A listing of
all chapters is detailed in the contents pages of this manual.
Chapter Structure The structure of each chapter within the manual may vary dependent upon
layout of information, (with the exception of module chapters).
All printer module chapters are given a common generic structure, enabling the
user to become familiarized with a standard module information layout. The
breakdown of a typical module chapter is detailed in the table below:
Section Heading Description
Overview Includes a diagrammatic overview with a description of the
module operation, detailing relevant sequences and/or posi-
tional information.
Pneumatic and/or Electrical
Schematic
Block diagram detailing the electrical system, including signals,
electronic components etc, (and pneumatics if necessary).
Adjustments and Settings Provides information on any adjustment and/or setting in order
to enable correct module functionality.
Replacement Procedures Where applicable, details technical instruction for the replace-
ment of individual components within the module.
Calibrations Where applicable, describes how to calibrate the module follow-
ing installation, adjustment or replacement procedures.