Micron Technical Reference V9 Volume 1 - 第15页
INTRODUCTION CONVENTIONS Chapter Issue 12, Feb 18 Technical Reference Manual 1.5 Figure 1-1 T ypical Page Layout Item Description 1 Company Logo 2 Figure 3 Figure Chapter-Number and T itle 4 Chapter Issue State 5 Chapter…
INTRODUCTION
CONVENTIONS
1.4 Technical Reference Manual Chapter Issue 12, Feb 18
CONVENTIONS
General The manual follows a logical method of portraying information to the user. This
philosophy is consistent across the complete range of manuals.
The following briefly describes the conventions typical of any DEK technical
publication.
Page Layout An example of a typical chapter page layout is detailed in the Typical Page
Layout figure.
Safety Notices Safety notices and associated symbols are utilized throughout the complete
manual range to highlight to the user the possible risks that may cause injury to
personnel (for further information refer to the Safety Features Chapter). An
example is shown below:
WARNING
BOARD CLAMPS. EXTREME CARE MUST BE EXERCISED WHEN WORKING IN
THE TOOLING AREA OF THE MACHINE TO AVOID INJURY. THE FOILS ON THE
FRONT AND REAR BOARD CLAMPS ARE VERY SHARP.
Notes Notes are used extensively throughout the manuals both in text and graphics to
provide additional information to the user. Notes are displayed in italic text
prefixed by the word in uppercase. An example is shown below:
NOTE
Detailed information regarding print processing in general is highlighted......
Bold Text Bold text is used throughout the manuals to identify the following occurrences:
• An action on the user, (example shown below):
1. Select Run Diagnost.
• A message displayed on the monitor screen, (example shown below):
The following message is displayed: ‘Ensure that the correct squeegees are
fitted.’
• A dimension, (example shown below):
1. Loosen the securing screw using a 4mm Allen key.
INTRODUCTION
CONVENTIONS
Chapter Issue 12, Feb 18 Technical Reference Manual 1.5
Figure 1-1 Typical Page Layout
Item Description
1 Company Logo
2 Figure
3 Figure Chapter-Number and Title
4 Chapter Issue State
5 Chapter Number and Page
6 Subject Subtitle
7 Subject Title
8 Main Subject Title
9 Chapter Title
System Button
Right
Jog Button
Right
Jog Button
View on Front of Machine
Start Button
EMO (at rear)
SAFETY FEATURES
GENERAL
2.6 Technical Reference Manual Chapter Issue 2 Nov 07
GENERAL DEK printing machines incorporate safety features that provide a safe operating
environment for the operator and the machine.
EStop The machine is fitted with emergency push buttontwo machine off (EMO)
control switches located at the front and rear of the machine. Operation of either
EMO initiates immediate hutdown of the machines.
The printhead cover is fitted with a cam interlock switch to protect personnel
from internal moving parts.
1
2
3
4
5
6
7
8
9
GENERAL
Emergency
Machine Off
Covers
Lid Bolt
Figure 2-1 Machine Controls
A lid bolt is fitted to the machine to prevent the front printhead cover from being
raised during the print cycle.
The lid bolt is withdrawn and the printhead cover may be raised:
• When Open Cover is requested by the software
• When Pause or Stop is selected during a print cycle
• When the EMO is pressed
Left
Jog Button
Left
Jog Button
EMO
Internal Light
INTRODUCTION
PRINTER OPTIONS
1.6 Technical Reference Manual Chapter Issue 12, Feb 18
PRINTER OPTIONS
This comprehensive set of manuals cover all possible options available for
fitment to these printers. Some options described within these manuals may not
pertain to your particular printer.
The table below lists all the available hardware options:
Feature
Adjustable Stencil Mount (ASM)
Adjustable Width Stencil Mount (AWSM)
Auto Stencil Load
Barcode Reader (Product)
Barcode Reader (Remote)
Dedicated Tooling
Direct Ball Placement
Foreign Machine Interface Pod
HawkEye Camera (750 or 1700) - specification only
Grid-Lok Tooling
Heavy Board Rails
High Throughput Conveyor (HTC)
Modular Conveyor Product Transport System
MultiFlex Tooling
Multi-Interface Unit
Over the Top Snugger (OTS)
Paste Dispenser
ProActiv
Product Verification and Traceability
ProFlow ATx
Remote Board Stop
Semi-Auto Stencil Loader
Squeegee Drip Tray
Squeegee Pressure Hardware
Stinger
Temperature & Humidity Sensor
Underscreen Cleaner
Underscreen Cleaner (Blue)
Underscreen Cleaner (Cyclone)
Vacuum Box Tooling
Virtual Panel Tooling