Micron Technical Reference V9 Volume 1 - 第18页

INTRODUCTION SOFTWARE/HARDWARE CONFIGURATIONS 1.8 Technical Reference Manual Chapter Issue 12, Feb 18 Software Release V ersion 9 SP04 Software Hardware Software Release V ersion 9 SP05 Software Hardware Feature Detail D…

100%1 / 290
INTRODUCTION
SOFTWARE/HARDWARE CONFIGURATIONS
Chapter Issue 12, Feb 18 Technical Reference Manual 1.7
SOFTWARE/HARDWARE CONFIGURATIONS
Software Release Version 9
Software
Hardware
Software Release Version 9 SP01
Software
Hardware
Software Release Version 9 SP02
Software
Hardware
Feature Detail
Operation Introduction of a new user software interface
Feature Detail
GEM Introduction of GEM to Version 09 software
Board Count Introduction of board count to Version 09 software
Languages Temperature and Humidity displays in Chinese
Remote Barcode Reader Remote barcode reader now works correctly
Defect Fixes Various
Feature Detail
Cyclone Under Screen Cleaner Introduction of the new under screen cleaning system
Feature Detail
Defect Fixes Various
INTRODUCTION
SOFTWARE/HARDWARE CONFIGURATIONS
1.8 Technical Reference Manual Chapter Issue 12, Feb 18
Software Release Version 9 SP04
Software
Hardware
Software Release Version 9 SP05
Software
Hardware
Feature Detail
Defect Fixes Various
Feature Detail
Printer Covers Introduction to the new look iX printers
Rapid Transit Conveyor The Rapid Transit Conveyor (RTC) module can accom-
modate up to three boards in the printer at a time; this
reduces the printer cycle time
Feature Detail
Defect Fixes Various
Feature Detail
Modular Transport Rails Introduction to the modular transport rail system. This
rail system allows modules to be changed without hav-
ing to replace the complete assembly. Modularity can
support a variety of tooling and clamping arrangements;
the current module is: Over the Top Snuggers (see
below)
Over the Top Snuggers Substrate clamping arrangement to hold the substrate
flat to enable good tooling contact. The over the top
clamp is withdrawn to provide a flat surface for printing
Programmable Beacon Instruction on how to set up and use the programmable
beacon
Print Roll Height Monitor The roll height monitor measures the height of the paste
roll to give system feedback for replenishment.
INTRODUCTION
SOFTWARE/HARDWARE CONFIGURATIONS
Chapter Issue 12, Feb 18 Technical Reference Manual 1.9
Software Release Version 9 SP06
Software
Hardware
Software Release Version 9 SP07
Software
Hardware
Feature Detail
Defect Fixes Various
Feature Detail
Modular Transport Rails Update to the modular transport rail system. This rail
system allows tooling modules to be changed without
having to replace the complete transportation assem-
bly. Includes information on the modular version of the
High Throughput Conveyor (HTC) system.
Feature Detail
Defect Fixes Various
Feature Detail
ProFlow Tx The evolution of ProFlow - Enclosed printing, widens
the performance envelope.
ProFlow ATx Advanced ProFlow system, single cartridge, active
paste handling.
Over the Top Snuggers Additional snugging module for the modular transport
rail system.
Print Roll Height Monitor Upgrade to the paste roll height monitoring system.
ProActiv Module Active squeegees to enhance paste deposition.
Remote Barcode Reader New reader - replaces the existing unit with more func-
tionality.