Micron Technical Reference V9 Volume 1 - 第20页
INTRODUCTION SOFTWARE/HARDWARE CONFIGURATIONS 1.10 Technical Reference Manual Chapter Issue 12, Feb 18 Software Release V ersion 9 SP08 Software Hardware Software Release V ersion 9 SP09 Software Hardware Software Releas…
INTRODUCTION
SOFTWARE/HARDWARE CONFIGURATIONS
Chapter Issue 12, Feb 18 Technical Reference Manual 1.9
Software Release Version 9 SP06
Software
Hardware
Software Release Version 9 SP07
Software
Hardware
Feature Detail
Defect Fixes Various
Feature Detail
Modular Transport Rails Update to the modular transport rail system. This rail
system allows tooling modules to be changed without
having to replace the complete transportation assem-
bly. Includes information on the modular version of the
High Throughput Conveyor (HTC) system.
Feature Detail
Defect Fixes Various
Feature Detail
ProFlow Tx The evolution of ProFlow - Enclosed printing, widens
the performance envelope.
ProFlow ATx Advanced ProFlow system, single cartridge, active
paste handling.
Over the Top Snuggers Additional snugging module for the modular transport
rail system.
Print Roll Height Monitor Upgrade to the paste roll height monitoring system.
ProActiv Module Active squeegees to enhance paste deposition.
Remote Barcode Reader New reader - replaces the existing unit with more func-
tionality.
INTRODUCTION
SOFTWARE/HARDWARE CONFIGURATIONS
1.10 Technical Reference Manual Chapter Issue 12, Feb 18
Software Release Version 9 SP08
Software
Hardware
Software Release Version 9 SP09
Software
Hardware
Software Release Version 9 SP10
Software
Hardware
Feature Detail
Stinger Adhesive dot dispensing module option
Defect Fixes Various
Feature Detail
Stinger Adhesive deposition module option
Verification and Traceability Rationalisation of capabilities with a single barcode
reader for 1D and 2D
Underscreen cleaner Enhanced cleaning capabilities
Magna Print Magnetic squeegee application
Feature Detail
Defect Fixes Various
Feature Detail
Heavy Pallet Rails Option not featured; a stand-alone manual exists
Feature Detail
Stinger Auto calibration and purging routines
Defect Fixes Various
Feature Detail
Stinger Purge pot
INTRODUCTION
SOFTWARE/HARDWARE CONFIGURATIONS
Chapter Issue 12, Feb 18 Technical Reference Manual 1.11
Software Release Version 9 SP11
Software
Hardware No hardware enhancements added.
Software Release Version 9 SP12
Software
Hardware No hardware enhancements.
Software Release Version 9 SP13
Software
Hardware No hardware enhancements.
Software Release Version 9 SP13 P04
Software
Hardware
Feature Detail
GEM Improved functionality
Defect Fixes Various
Feature Detail
SMEMA Good Board/Bad Board Enhancements for down line transfers
Power Monitor Software Improved PSU voltage monitoring
Defect Fixes Various
Feature Detail
Double Alignment Option This option can enable improvements to the alignment
accuracy.
Defect Fixes Various
Feature Detail
Defect Fixes Various
Feature Detail
Style 2 Rising Table ASM are continuously using qualitative methodologies
such as Lean Manufacturing to reduce waste and Six
Sigma to increase quality linking to improve manufac-
turing productivity
Underscreen Cleaner Size Options 300,400 and 520mm cleaning options available
Barcode Reader Configuration
Cards
Updated configuration cards to improve read quality
Rear Rail Parallelism New setting jig added
Chase Sensor Replaced thru-beam opto sensor with a reflective type