Micron Technical Reference V9 Volume 1 - 第21页
INTRODUCTION SOFTWARE/HARDWARE CONFIGURATIONS Chapter Issue 12, Feb 18 Technical Reference Manual 1.11 Software Release V ersion 9 SP1 1 Software Hardware No hardware enhancements added. Software Release V ersion 9 SP12 …
INTRODUCTION
SOFTWARE/HARDWARE CONFIGURATIONS
1.10 Technical Reference Manual Chapter Issue 12, Feb 18
Software Release Version 9 SP08
Software
Hardware
Software Release Version 9 SP09
Software
Hardware
Software Release Version 9 SP10
Software
Hardware
Feature Detail
Stinger Adhesive dot dispensing module option
Defect Fixes Various
Feature Detail
Stinger Adhesive deposition module option
Verification and Traceability Rationalisation of capabilities with a single barcode
reader for 1D and 2D
Underscreen cleaner Enhanced cleaning capabilities
Magna Print Magnetic squeegee application
Feature Detail
Defect Fixes Various
Feature Detail
Heavy Pallet Rails Option not featured; a stand-alone manual exists
Feature Detail
Stinger Auto calibration and purging routines
Defect Fixes Various
Feature Detail
Stinger Purge pot
INTRODUCTION
SOFTWARE/HARDWARE CONFIGURATIONS
Chapter Issue 12, Feb 18 Technical Reference Manual 1.11
Software Release Version 9 SP11
Software
Hardware No hardware enhancements added.
Software Release Version 9 SP12
Software
Hardware No hardware enhancements.
Software Release Version 9 SP13
Software
Hardware No hardware enhancements.
Software Release Version 9 SP13 P04
Software
Hardware
Feature Detail
GEM Improved functionality
Defect Fixes Various
Feature Detail
SMEMA Good Board/Bad Board Enhancements for down line transfers
Power Monitor Software Improved PSU voltage monitoring
Defect Fixes Various
Feature Detail
Double Alignment Option This option can enable improvements to the alignment
accuracy.
Defect Fixes Various
Feature Detail
Defect Fixes Various
Feature Detail
Style 2 Rising Table ASM are continuously using qualitative methodologies
such as Lean Manufacturing to reduce waste and Six
Sigma to increase quality linking to improve manufac-
turing productivity
Underscreen Cleaner Size Options 300,400 and 520mm cleaning options available
Barcode Reader Configuration
Cards
Updated configuration cards to improve read quality
Rear Rail Parallelism New setting jig added
Chase Sensor Replaced thru-beam opto sensor with a reflective type
INTRODUCTION
SOFTWARE/HARDWARE CONFIGURATIONS
1.12 Technical Reference Manual Chapter Issue 12, Feb 18
Software Release Version 9 SP14
Software
Hardware No hardware enhancements.
Software Release Version 9 SP15 -17
Software
Hardware Hardware options.
Feature Detail
Operating System Software updated to work on Windows 7 Embedded
and Windows XP Embedded systems
QC Calc Newer version of QC Calc capable of running on Win-
dows 7 Embedded
Defect Fixes Various
Feature Detail
Cyclone Duo Underscreen Cleaner Support for the dual chamber Cyclone USC. This unit
allows a fabric wetting and vacuum process all in the
same sweep
Process Expert The line process self learning SMT expert system
Verification and Traceability Updated version (V2)
APC All Purpose Clamping system software support
Line Control MES PCB and Recipe controlled verification
SIPLACE OIS The configurable Operator Information System is used
to tailor the output
Feature Detail
Cyclone Duo Underscreen Cleaner Dual Chamber Cyclone USC
APC All Purpose Clamping hardware