Micron Technical Reference V9 Volume 1 - 第253页

PROACTIV OVERVIEW Chapter Issue 5, Jan 15 Technical Reference Manual 10.3 The squeegee blades are mounted and secured to the mechan ism by the mounting bar using the fixing screws. Each squeegee has an integral ProActiv …

PROACTIV

OVERVIEW

10.2 Technical Reference Manual Chapter Issue 5, Jan 15

Elements The ProActiv module consists of:

• A squeegee mechanism to house the sensors

• Electronic control modules and associated wiring looms

• A pair of active squeegees (sizes available: 170/200/250/300mm with or

without a pair of paste deflectors)

• A pair of proximity sensors to sense the squeegee up/down movements

Squeegee

Mechanism

The squeegee mechanism houses a pair of motors, which lift and lower the

squeegees. Driving the squeegee down, onto the stencil, creates the print

pressure needed to force the paste through the stencil apertures. The mecha-

nism has an electrical connector bracket that houses the electrical connectors,

switches and indicators, which are used to supply power and signals to the

active squeegees.

Active Squeegees The front and rear squeegees have active elements, which provide the motive

forces that are used to ‘work’ the paste.

NOTE

1. Only use the original matched ProActiv squeegee pair, as supplied with the

printer or as part of a machine upgrade. Optimum performance may not be

achieved if an alternative ProActiv squeegee pair is used. Contact ASM

customer support for assistance.

2. Handling active squeegees. Do not mishandle or drop active squeegees.

This may cause damage to the active elements. Always stow away securely.

3. Immersion of any part of the ProActiv unit in liquids causes irreparable

damage to the unit. It may also cause permanent damage when fitted to the

printer.

Rear View of an Active Squeegee Assembly

1 ProActiv Connector Mount

2 Mounting Bar

3 Squeegee Blade

4 Squeegee Blade Fixing Screws (14 off)

PROACTIV

OVERVIEW

Chapter Issue 5, Jan 15 Technical Reference Manual 10.3

The squeegee blades are mounted and secured to the mechanism by the

mounting bar using the fixing screws.

Each squeegee has an integral ProActiv connector mount that allows the output

from the control module to activate the squeegee.

Squeegee Blades Squeegee blades are available in sizes: 170, 200, 250 and 300mm blade widths

and two blade depths, either 6 or 15mm. These measurements refer to the

portion of the blade that is used to work the paste, as shown below. The part

number and width are engraved on each blade.

Mount the blades in the active squeegee assemblies with the part number and

size facing the front.

Blade Width

6 or 15 mm Options

PROACTIV

OVERVIEW

10.4 Technical Reference Manual Chapter Issue 5, Jan 15

Paste Deflectors Paste deflectors are available to deflect paste back to the centre of the blade

and prevent the formation of tramlines. The deflectors are available for 170,

200, 250 and 300mm sized squeegee blades and are secured to either end of

the squeegee.

170mm

200mm

250mm

300mm

Paste Deflector

Securing Screws