Micron Technical Reference V9 Volume 1 - 第26页
SAFETY FEATURES PRINTER SAFETY FEATURES 2.2 Technical Reference Manual C hapter Issue 14, Feb 18 W arning Notices Warning notices draw the attention of users/maintainers to a potentially hazard- ous situation which, if n…
SAFETY FEATURES
PRINTER SAFETY FEATURES
Chapter Issue 14, Feb 18 Technical Reference Manual 2.1
CHAPTER 2 SAFETY FEATURES
PRINTER SAFETY FEATURES
Introduction This section describes the various safety features that are incorporated into the
printer to provide a safe operating and maintenance environment.
Safety Notices Safety notices in the form of PROHIBITION, WARNING, CAUTION and MAN-
DATORY labels are placed on the printing printer and notices are posted
throughout the associated documentation to alert the operator/maintainer to
possible hazards which may cause physical injury or equipment damage.
The following label illustrated below, may be fitted to the printer, this signifies
that the user should refer to the relevant section of the Technical Reference
Manual before attempting to carry out work on the equipment.
Prohibition Notices Prohibition notices draw the attention of users/maintainers to prohibiting behav-
iour likely to cause a risk to health or safety. The following table displays the
prohibition labels affixed to printer and displayed in the printer documentation:
SYMBOL DEFINITION
PROHIBITION
STRONG MAGNETIC FIELD. A STRONG MAGNETIC FIELD EXISTS IN
THE VICINITY OF THE LINEAR MOTORS THAT MAY ACT UPON FER-
ROUS OBJECTS WHOSE MOVEMENTS COULD LEAD TO PERSONAL
INJURY AND/OR DAMAGE TO THE MACHINE.
PROHIBITION
STRONG MAGNETIC FIELD. A STRONG MAGNETIC FIELD EXISTS IN
THE VICINITY OF THE LINEAR MOTORS THAT REPRESENT A SERI-
OUS HAZARD TO PEOPLE FITTED WITH METALLIC IMPLANTS.
PROHIBITION
ELECTROMAGNETIC FIELD. AN ELECTROMAGNETIC FIELD EXISTS
WITHIN THE MACHINE FROM THE LINEAR MOTORS. THESE MAY
PRESENT A HAZARD TO PEOPLE FITTED WITH AN IMPLANTED CAR-
DIAC DEVICE. THE MOTOR MANUFACTURER RECOMMENDS A SAFE
DISTANCE OF AT LEAST 15MM.
PROHIBITION
MACHINE COVERS. IN ORDER TO PROTECT PERSONNEL AND TO
PREVENT DAMAGE TO THE MACHINE, COVERS ARE FITTED TO THE
MACHINE FRAME. THESE PANELS MUST ONLY BE REMOVED BY
SUITABLY QUALIFIED PERSONNEL.
SAFETY FEATURES
PRINTER SAFETY FEATURES
2.2 Technical Reference Manual Chapter Issue 14, Feb 18
Warning Notices Warning notices draw the attention of users/maintainers to a potentially hazard-
ous situation which, if not avoided, could result in death or serious injury. The
following table displays the warning labels affixed to the printer and/or displayed
in the printer documentation:
SYMBOL DEFINITION
WARNING
MOVING PARTS. MOVING PARTS ARE PRESENT IN THE VICINITY
OF THIS WARNING LABEL, THESE PARTS HAVE THE POTENTIAL
TO CAUSE INJURY.
WARNING
BOARD CLAMPS. EXTREME CARE MUST BE EXERCISED WHEN
WORKING IN THE TOOLING AREA OF THE MACHINE TO AVOID
INJURY. THE FOILS ON THE FRONT AND REAR BOARD CLAMPS
ARE VERY SHARP.
WARNING
FLAMMABLE. FLAMMABLE SUBSTANCES ARE PRESENT. KEEP
AWAY FROM HEAT, SOURCES OF IGNITION AND STATIC DIS-
CHARGES. USE IN A WELL VENTILATED AREA.
WARNING
LETHAL VOLTAGE. DANGEROUS VOLTAGES EXIST IN THIS EQUIP-
MENT. ENSURE ALL ELECTRONIC COVERS AND MAIN MACHINE
COVERS ARE FITTED BEFORE OPERATING THIS EQUIPMENT.
WARNING
HOT SURFACES. THE SURFACE OF THIS COMPONENT OR SUR-
ROUNDING AREA MAY BECOME HOT DURING PROLONGED OPER-
ATION. CARE TO BE TAKEN WHEN WORKING IN THE VICINITY OF
THIS COMPONENT.
WARNING
STRONG MAGNET FIELD. A STRONG MAGNETIC FIELD EXISTS IN
THE VICINITY OF THE LINEAR MOTORS. THIS MAY PRESENT A
HAZARD TO PERSONNEL OR EQUIPMENT.
WARNING
COMPRESSED AIR. COMPRESSED AIR SHOULD NEVER IMPINGE
UPON THE BODY. PORTS, PIPES, ETC MUST NEVER BE BLOCKED
BY HAND. BEFORE CONNECTING OR DISCONNECTING ANY
PNEUMATIC COMPONENTS, ENSURE THE COMPRESSED AIR
SUPPLY HAS BEEN DISSIPATED AND DISCONNECTED FROM THE
MACHINE.
))
((
SAFETY FEATURES
PRINTER SAFETY FEATURES
Chapter Issue 14, Feb 18 Technical Reference Manual 2.3
Caution Notices Caution notices draw the attention of users/maintainers to a potentially hazard-
ous situation which, if not avoided may result in minor or moderate injury. The
following table displays the caution labels affixed to the printer and/or displayed
in the printer documentation:
WARNING
E STOP CIRCUIT. THE E STOP CIRCUIT FITTED TO THE MACHINE
ONLY ISOLATES THE 24V AND 42V SUPPLIES TO THE MAIN CON-
TACTORS. LETHAL VOLTAGES ARE STILL PRESENT WITHIN THE
MACHINE AFTER THE E STOP HAS BEEN ACTIVATED.
WARNING
HARMFUL SUBSTANCES. CLEANING WIPES AND CLEANING
SOLUTIONS MAY CONTAIN SUBSTANCES HAZARDOUS TO
HEALTH. WHEN USING CLEANING WIPES AND CLEANING SOLU-
TIONS THE MANUFACTURERS’ SAFETY DATA SHEETS MUST BE
STRICTLY ADHERED TO.
WARNING
MACHINE LIFTING. TO PREVENT SERIOUS INJURY TO PERSON-
NEL, DURING LIFTING AND TRANSPORTATION OPERATIONS,
ENSURE THE MACHINE IS LIFTED AND TRANSPORTED IN ACCOR-
DANCE WITH INSTRUCTIONS DETAILED IN THIS SECTION.
WARNING
SOLVENT SPRAY. THE UNDERSCREEN CLEANER SPRAYS A FINE
JET OF SOLVENT SOLUTION ON TO THE CLEANER. APPROVED
PROTECTIVE CLOTHING SHOULD BE WORN.
WARNING
HEAVY OBJECT. EXTREME CAUTION SHOULD BE EXERCISED
WHEN MANUALLY HANDLING HEAVY ITEMS INTO OR OUT OF THE
MACHINE.
SYMBOL DEFINITION
SYMBOL DEFINITION
CAUTION
RECOMMENDED SOLVENTS. ANY SOLVENTS USED MUST COM-
PLY WITH LOCAL ENVIRONMENTAL GUIDELINES. ASM RECOM-
MEND USING SOLVENTS THAT ARE ENVIRONMENTALLY
FRIENDLY, IE CFC FREE AND WATER BASED. SOLVENTS USED
MUST HAVE FAST EVAPORATION RATES AND FLASHPOINT SPEC-
IFICATIONS GREATER THAN 39ºC.
CAUTION
SOLDER PASTE AND SOLVENTS. WHEN USING OR HANDLING ANY
SOLDER PASTE OR SOLVENT FORMULATION THE MANUFACTUR-
ERS’ SAFETY DATA SHEETS MUST BE STRICTLY ADHERED TO.