JANETS_INM - 第123页
JaNets In structio n Manual 5. Shopflo or Setu p 5-3 Floor – How to Oper ate Creation of floor In the stat us where the unar ranged line hi erarch y or floor hier archy of the f loor configurat ion tree is selected, exe …
JaNets Instruction Manual 5. Shopfloor Setup
5-2
Menu items
Table 5.1-1 Description of each item
Menu item
Shortcut
Description
File (F)
New (N)
Creates a line, machine and/or equipment.
Delete (D) Deletes a line or machine selected on the floor
configuration tree.
Rename (M)
Changes the name of a floor, line or machine
selected on the floor tree.
Save (S)
Ctrl+S
Saves the setting(s) you made.
Print (P) Ctrl+P Displays the “Print Settings” screen.
Save as Text (T)
Displays the “Save as Text” screen.
Exit Shopfloor Setup (X)
Quits the Shopfloor Setup.
View (V)
Line Explorer (E)
Displays/hides the Line Explorer.
Toolbar (T)
Displays/hides the toolbar.
Status Bar (B)
Displays/hides the status bar.
Tools (T) Permanent Setup (P) Displays the “Permanent Feeders”/”Permanent
Nozzles” setting screen.
Set Environments (E)
Displays the “Set Environments” screen.
Equipment Setup (Q)
Displays the “Equipment Setup” screen.
Adhesive parameter setting
(A)
Display of the adhesive parameter setting screen.
Monitor line setting (L)
Display of the monitor line setting screen. *
Help (H)
Table of Contents (C)
Displays the Help screen.
About (A)
Displays the version information.
* This is displayed only when a Line Manager option is added.
Toolbar
Figure 5.1-3 Toolbar
Table 5.1-2 Description of each tool displayed on the toolbar
Item
Description
Delete
Deletes a line, a machine or equipment selected on the floor configuration tree.
Save
Saves the settings you made onto the PC.
Print
Displays the “Print Settings” screen.
Help Monitor line setting
Display of the monitor line setting screen. *
* This is displayed only when a Line Manager option is added.
Limitations of monitor line editing
1. When the line being monitored exists on the floor …. The floor name cannot be changed or
deleted.
2. Selection of the line being monitored …. The floor arrangement, line name, line configuration,
collective line arrangement clearing cannot be changed.
3. The detail setting of the machine arranged in the line being monitored cannot be changed.
Delete
Save
Print
Monitor line setting
Line
JaNets Instruction Manual 5. Shopfloor Setup
5-3
Floor – How to Operate
Creation of floor
In the status where the unarranged line hierarchy or floor hierarchy of the floor configuration tree is
selected, execute either operation ① or ②.
① Select “File” – “New document” – “Floor.”
② Display the popup menu by clicking the right-button of the mouse, and select “New document”
– “Floor.”
Figure 5.2-1 “Floor” New document (Operation ②)
Figure 5.2-2 “Floor” New document dialog
Floor name: Up to 20 characters can be set. There is no distinction between upper-case
characters and lower-case characters.
Single-byte alphanumeric characters and special characters can be used.
However, the following special characters cannot be used. (“, #, &, ‘, <, >)
A floor name with the same name as line, machine and equipment cannot be
registered.
OK: A new floor is added to the floor configuration tree and put into a selectable status.
JaNets Instruction Manual 5. Shopfloor Setup
5-4
Changing the floor name
Select the desired “floor” hierarchy from the floor configuration tree. Then, perform the operation
① or ② below.
① Select the [File] command from the menu bar, and then the [Rename] command from the “File”
menu.
② Click the right button of a mouse to display the pop-up menu. Select the [Rename] from this
pop-up menu.
* When you perform the operation ① or ②, the selected floor layer can accept your input, and
you can change its name.
Figure 5.2-3 Changing the “floor name” (Operation ②)
Deletion of floor
In the status where a floor hierarchy in the floor configuration tree, execute either operation ① or
② shown below.
① Select “File” – “Delete.”
② Click the right button of the mouse and select “Delete” in the displayed popup menu.
* An unarranged hierarchy cannot be deleted.
Figure 5.2-4 Deletion of “Floor” (Operation ②)