JANETS_INM - 第131页
JaNets In structio n Manual 5. Shopflo or Setu p 5- 11 Line – How to Oper ate Creating a new production line Select an unassigne d pro duction l ine or a fl oor from the f loor confi gurations tree, and th en perfor m th…
JaNets Instruction Manual 5. Shopfloor Setup
5-10
Setting the floor properties
When you click the <Properties> button, the following screen appears.
Figure 5.2-20 “Floor Properties”
Figure 5.2-21 Before changing the settings in
the “Floor Properties” fields
Figure 5.2-22 After changing the settings in
the “Floor Properties” fields
When an error message appears
An error message appears when:
1. You change the setting in the “Floor Properties” fields to any value not within the input range.
2. You set the floor size smaller than the production line assignment area on the floor view.
* When you click the <OK> on the error message screen in either case above, the
“Shopfloor Setup” screen reappears.
Set the “Floor Size” in the following format:
horizontal width (X-axis) × vertical width (Y-axis).
Input range: 5×5 to 50 × 50
Set the comment for a floor.
You can enter up to 64 characters regardless
of the character width, half-width or full-width.
JaNets Instruction Manual 5. Shopfloor Setup
5-11
Line – How to Operate
Creating a new production line
Select an unassigned production line or a floor from the floor configurations tree, and then perform
the operation ① or ② below.
To create a line configuration of the line mode, select Line. To create a line configuration of the
EPU mode, select EPU.
Line can be selected only when a Line Manager option is added.
① Select the [File] command from the menu bar, the [New] command and the [Line] (or [EPU])
command in this order.
② Click the right button of a mouse to display the pop-up menu. Select the [New] command, and
then the [Line] (or [EPU]) command from this pop-up menu.
Figure 5.3-1 Creating a new production line (Operation ②)
Figure 5.3-2 “Create New Line” dialog box
Line Name: You can enter up to 20 characters, and the lower cases are not distinguished from
the upper cases. You can enter half-width alphanumeric characters and the
following special characters.
However, you cannot use the following special characters: (”)「#」「&」「’」「<」「>」)
You cannot enter same line name between floor and machine, equipment.
OK: The system adds a production line.
Figure 5.3-3 Configuration tree icon
LINE mode
EPU mode
JaNets Instruction Manual 5. Shopfloor Setup
5-12
Renaming a production line
Select a desired line (or EPU) from the floor configuration tree, and perform the operation ① or
② below.
① Select the [File] command from the menu bar, and then the [Rename] command from the “File”
menu.
② Click the right button of a mouse to display the pop-up menu. Select the [Rename] command
from this pop-up menu.
* When you perform the operation ① or ②, the selected production line hierarchy can accept
your input, and you can change the production line name.
Figure 5.3-4 Changing the production line name (Operation ②)
Deleting a production line
Select a production line (or EPU) from the floor configuration tree, and perform the operation ①
or ② below.
① Select the [File] command from the menu bar, and then the [Delete] command from the “File”
menu.
② Click the right button of a mouse to display the pop-up menu. Select the [Delete] command
from this pop-up menu.
* You cannot delete any unassigned machine hierarchy.
Figure 5.3-5 Deleting a production line name (Operation ②)