JANETS_INM - 第140页
JaNets In structio n Manual 5. Shopflo or Setu p 5- 20 T able 5.4 -1 De vices disp layed on t he machine view Icon Device Icon Device Nozzle OCC V acuum pump Placement m onitor Automati c board wid th adjustment unit IC …
JaNets Instruction Manual 5. Shopfloor Setup
5-19
Machine view (Machine information display)
Figure 5.4-5 Example of the machine selection screen
Machine view : The image of the machine selected on the floor configuration tree is
displayed here.
The model name, devices and option conditions of the machine are visually displayed.
Figure 5.4-6 Machine view of the standard
setting
Figure 5.4-7 Machine view of option devices
Machine details
Machine view
Select a machine on
the floor configuration
tree.
JaNets Instruction Manual 5. Shopfloor Setup
5-20
Table 5.4-1 Devices displayed on the machine view
Icon
Device
Icon
Device
Nozzle
OCC
Vacuum pump
Placement monitor
Automatic board width
adjustment unit
IC collection belt
VCS unit
Trash box for extra-large components
Verify (6 axes)
SOT direction inspection table
Coplanarity
MTS non-stop operation
Multi-tray (MTS)
Low-speed 2 (MTC/MTS)
Load Control
Solder printing recognition and placement
position correction
IFS-NX
Traceability
Long board option
Fluxer
Reference pin unit
Attachment detection
MTS non-stop operation
Bad mark reader
L-Wide transport
MNVC
Verify
HMS pick position correction
Transport stopper
Component falling detecting function
Applicator head
Detection of the residual quantity of the
left head
Detection of the residual quantity of the
center head
Detection of the residual quantity of the
right head
Application check
JaNets Instruction Manual 5. Shopfloor Setup
5-21
Table 5.4-2 List of operation options
Icon
Operation option
Icon
Operation option
Verify Comp (component) Release
Reduce PWB in process
Tombstone Detection
Component Feed Timing Before Pick
Dimension Check
Component Feed Timing After Pick
Stop when comp. (components) run
out
Start moving before the completion of
pick check in sequential pick
Stop on any error
Pick Position Check
Production during board
transportation
Start production after transport is
finished
Fluxer operation after recognition with
a VCS
Production during board
transportation
Nozzle replacement during board
transportation
Pause when an EPV component
existence error occurs
Production during board
transportation
Component pick-up during board
transportation
Place Sequence for Matrix Boards
Build panel by circuit
Nonstop vision centering
Place Sequence for Matrix Boards
Build circuit by component ID
Recognition of solder transfer image
Image recognition before solder
transfer
Place Sequence for Matrix Boards
Build circuit by pick groups
Bad mark propagation
Fiducial mark propagation
Start PWB reducing function
Laser surface contact check
IC nozzle allocation before a start of
production
Placement PWB surface height
measurement