JANETS_INM - 第142页

JaNets In structio n Manual 5. Shopflo or Setu p 5- 22 Machi ne deta ils Set the basic i nformat ion on a mac hine and t he con dition of each d evice. The items you set here a re reflecte d on the mac hine view scr een …

100%1 / 755
JaNets Instruction Manual 5. Shopfloor Setup
5-21
Table 5.4-2 List of operation options
Icon
Operation option
Icon
Operation option
Verify Comp (component) Release
Reduce PWB in process
Tombstone Detection
Component Feed Timing Before Pick
Dimension Check
Component Feed Timing After Pick
Stop when comp. (components) run
out
Start moving before the completion of
pick check in sequential pick
Stop on any error
Pick Position Check
Production during board
transportation
Start production after transport is
finished
Fluxer operation after recognition with
a VCS
Production during board
transportation
Nozzle replacement during board
transportation
Pause when an EPV component
existence error occurs
Production during board
transportation
Component pick-up during board
transportation
Place Sequence for Matrix Boards
Build panel by circuit
Nonstop vision centering
Place Sequence for Matrix Boards
Build circuit by component ID
Recognition of solder transfer image
Image recognition before solder
transfer
Place Sequence for Matrix Boards
Build circuit by pick groups
Bad mark propagation
Fiducial mark propagation
Start PWB reducing function
Laser surface contact check
IC nozzle allocation before a start of
production
Placement PWB surface height
measurement
JaNets Instruction Manual 5. Shopfloor Setup
5-22
Machine details
Set the basic information on a machine and the condition of each device. The items you set here
are reflected on the machine view screen visually.
Figure 5.4-8 Machine details screen
How to make the settings:
① Set data on each tab: “Basic Settings,” “Standard Devices,” “Option Devices” and “Operation
Options” in this order.
(When you select the “Standard Devices” tab after entering the IP address, the system
automatically checks the entered IP address, and then switches the “Basic Settings” tab to
the “Standard Devices” tab.)
* When a machine arranged in the line being monitored is selected, all the setting items of
basic setting, standard unit, option unit and operation option cannot be changed (displayed
in gray).
* When a machine arranged in the line in the EPU mode is selected, the status getting
button cannot be operated. (Displayed in gray)
* When a machine arranged in the line in the EPU mode is selected, the IP address cannot
be checked automatically.
OK: Validates the changes when you change the
settings of the machine details.
Undo: Discards the changes when you change
the settings of the machine details, and
restores them to the conditions you validated
last time.
Learn Conditions: Communicates to the machine
whose IP address/computer name is specified
to obtain the “Machine Type” and the detailed
information on the machine.
Permanent Information: Displays the
“Permanent Feeders” setting screen and the
“Permanent Nozzles” setting screen.
Connection Test:
Communicates with a
machine whose IP address/computer name
is specified in order to check to see if it is
connected to the system.
* This Connection Test function does not
guarantee the machine model connected to
the system. It checks response to the
specified machine.
JaNets Instruction Manual 5. Shopfloor Setup
5-23
Basic Settings
Figure 5.4-9 “Basic Settings” tab
Standard Devices/Option Devices/Operation Options
* The displayed items vary depending on the specifications of a machine.
Check box: Specify what device is attached to a machine (Select the "Use" or "Not use" for
Standard Devices.)
The "Use" or "Not use" selection button:
Select the "Use" or "Not use" of the device.
1) Example of a RX-6
Figure 5.4-10 Standard Devices (RX-6)
Machine Type: Select the machine type
(model name). When a machine is
assigned to a production line, you
cannot change its machine type here.
IP Address/Computer Name:
Set the IP address or the computer
name (you have to set either one here).
When it is arranged in the EPU mode,
no data is displayed.
Machine Version: Displays the machine
communication version.
Select the component height:
EC: 6mm
NC:12mm
HC: 20mm
EC: 25mm
UC: 33mm