JANETS_INM - 第203页

JaNets In structio n Manual 5. Shopflo or Setu p 5- 83 Color of an assigned feeder A feeder assigned o n the lay out scre en is colored d epend ing on its co ndition as sho wn below . Figure 5.9 - 53 Colors of a feede r …

JaNets Instruction Manual 5. Shopfloor Setup

5-82

Feeder Layout Screen

Various types of feeders and/or trays whose component supply position is specified are displayed

here. When “Auto” is selected in the “Machine” or “Bank” field, the corresponding data is not

displayed on the screen.

Configuration of the “Feeder Layout” screen

When only a production program is to be referred

Figure 5.9-52 “Feeder Layout” screen

JaNets Instruction Manual 5. Shopfloor Setup

5-83

Color of an assigned feeder

A feeder assigned on the layout screen is colored depending on its condition as shown below.

Figure 5.9-53 Colors of a feeder icon (normal condition, selected, set as a permanent feeder.)

* When the condition of each lane is different from that of a feeder itself if it has two or more

lanes, each lane and the feeder are colored depending on its condition respectively.

Operations（Feeder layout screen）

Displaying the details of a feeder

When you move the cursor over a feeder, the following items are displayed. When you move the

cursor over a permanent feeder, “[Permanent]” is additionally displayed at the component supply

position. When a feeder has two or more lanes, the lane number is displayed also. When you

move the cursor over a DTS, the tray level number from which components are supplied is

displayed.

Figure 5.9-54 Example of the “Feeder Layout” window (as a pop-up window)

Editing on the “Feeder Layout” screen

When you select the <Close> button on the “Select Machine” dialog box after editing data, the

message asking you whether to reflect your editing in the program data appears on the screen.

When you select the <Yes> button, your editing is reflected in the program data. At this time, the

Pick data is updated. The moved or copied component pick-up coordinates on a feeder are reset

to the designed values. The editing functions are explained below. Note that you cannot edit any

data on an IC collection belt.

Selecting a feeder

You can move, copy or delete a feeder by moving the cursor over the feeder or by dragging

the mouse to surround the feeder.

Normal condition:

black

Selected:

orange

Set as a permanent

feeder: blue

Each item is displayed also for a “stick,” “tray” or

“bulk” feeder or an “IC collection belt.”

JaNets Instruction Manual 5. Shopfloor Setup

5-84

Machine Icon Types

Table 5.8.9-1 Machine icons and their specifications

Icon Setting Applicable machine models

Board transport direction: Left to right

Reference side: Front

・RX-6 series

・RX-7 series

・KE-3020 series

・KE-3020R series

・KE-3010 series

・KE-3020V series

・KE-3020VR series

・FX-3 series

Board transport direction: Right to left

Reference side: Front

Board transport direction: Left to right

Reference side: Rear

Board transport direction: Right to left

Reference side: Rear

Icon Setting Applicable machine models

Board transport direction: Left to right

・RS-1 series

・JM-100

Board transport direction: Right to left

Icon Setting Applicable machine models

Board transport direction: Left to right

・JM-10 series

・JM-20 series

Board transport direction: Right to left

Icon Setting Applicable machine models

Board transport direction: Left to right

・RP-1

Board transport direction: Right to left