JANETS_INM - 第209页

JaNets In structio n Manual 7. Program Editor 7-2 7.3 Menu Confi guration 7.3.1 Menus T able 7.3 -1 Description of each menu item Menu item Description File (F) New (N) Creates a new production program. Open (O) Opens a …

JaNets Instruction Manual 7. Program Editor

7-1

7. Program Editor

7.1 Introduction

The Program Editor allows you to create a production program for a machine of the selected

production line.

7.2 Starting Up or Quitting the Program Editor

To start up the Program Editor: Double-click the “Create Data” tab from the JaNets Launcher,

and then the “Program Editor” icon.

To quit the Language Changer: Click the “File” tab, and then the “Program Editor” icon, or

select the close ( ) button at the upper right corner of the

title bar.

Figure 7.2-1 Screen displayed when the Program Editor starts up for the first time

JaNets Instruction Manual 7. Program Editor

7-2

7.3 Menu Configuration

7.3.1 Menus

Table 7.3-1 Description of each menu item

Menu item Description

File (F)

New (N)

Creates a new production program.

Open (O)

Opens a production program.

Save (S)

Saves a production program that is being edited.

Save as (A)

Assigns a name to a production program that is being edited, and

saves it.

Read CAD Data (C)

Reads CAD data into a production program.

Print & Save to file (P)

Prints production program data and outputs it as a file (*).

Exit Program Editor (X)

Quits the Program Editor.

Edit (E)

Undo (U)

Cancels the operation you have done most recently, and restores

the data to its original state.

Cut (T) <on the “Placement Data”

screen or “Pick Data” screen>

Saves data temporarily in a clipboard.

Copy (C) <on the “Placement Data”

screen>

Copies data onto the clipboard.

Paste (P) <on the “Placement Data”

screen>

Pastes data on the clipboard by the number of times specified for

copy operation.

Insert Line (I) <on the “Placement Data”

screen>

Inserts a blank line.

Duplicate Line (D) <on the “Placement

Data” screen or the “Pick Data”

screen>

Duplicates the specified line.

Location (G) ... <on a screen other than

the “PWB Data” screen>

Moves the cursor to the specified line.

Search (S) ...<on the “Placement

Data” screen, the “Component Data”

screen or the “Pick Data” screen>

Searches a placement ID or a component name, and displays the

screen for setting the search function.

Find Next (N) ...

Searches the next data.

Replace (R)

Replaces the component data at a time (*).

Cell Copy (O) <on the “Placement

Data” screen>

Copies data in a cell onto the clipboard.

Cell Paste (A)

Pastes data on the clipboard into a cell.

Change Component Name (H)

Changes a component name, and displays the screen for changing

a component name (you can use this command on a screen other

than the “PWB Data” screen).

Change of adhesive parameter name

(B)

Change of the adhesive pattern name

Display of the adhesive pattern name change screen

Update Layers (Y) <on the “Placement

Data” screen or the “Component Data”

screen)

Reflect the component layer in the placement layer: all compo-

nents are selected on the “Placement Data” screen, while a com-

ponent is selected on the “component Data” screen.

Matrix Paste (M) ...

Expands coordinates in a matrix according to your input of the X

pitch, Y pitch and the number of times, and then paste them. The

number of placement data records should be up to 30,000.

Clear Unlinked Comp Info (L) Deletes component data not linked with any placement data.

Clearing of unlinked adhesive infor-

mation (R)

Deletion of the adhesive data that is not linked with the component

data.

View (V)

Data Completion Status (D) Displays each data completion status.

Divided Placement Data (P) ...

Displays placement data that is assigned to each machine with the

Optimize function.

Feeder Layout (F) ...

Displays the feeder assignment condition of each machine graph-

ically.

Nozzle Layout (N) ...

Displays nozzles that are assigned to each machine with the Opti-

mize function.

Status (S) ... Displays the result of the tact (cycle time) simulation (*).

Board Viewer (V)

Displays the board transporting direction, the board layout offset,

the positioning hole and the component layout graphically.

Guidance Displays the explanation of an object where the cursor is located.

Coherence Check Results Displays the results of the data coherence check.

Line Explorer (E) ... Displays/hides the Line Explorer.

Toolbar (T) Displays/hides the toolbar.

JaNets Instruction Manual 7. Program Editor

7-3

Menu item Description

Status Bar (B) Displays/hides the status bar.

Optimize (O)

Configure Optimization (O) ...

Decides the placement order of a production program and assigns

a feeder(s)/a nozzle(s).

Change Line (L) ...

Changes a production line to be optimized (and displays the screen

for changing a production line).

No. of Feeders (U) ...

Sets the upper limits of the number of feeders to be used for each

component (*).

Data Coherence Check (D)

Checks coherence of a production program that is being edited and

a production line.

Tactration

(M)

Tact simulation (S)

The production time of the production program is measured in a

pseudo way.

The production operation is displayed and the component

pick-up/placement status is displayed graphically.

Database

(D)

Export to Database (B) Registers data in the database.

Import (C) Imports data from the list of the database.

Re-Search (R)

Searches the database or permanent information for component

data or pick data to update a production program (*).

Tools (T)

Merge Production Program (W)… Pastes another production program and copies it (*).

Set Environments (E) ... Sets the environment of the Program Editor (*).

CAD Conversion Setup (S) ... Makes settings of the CAD conversion.

Help (H) About(A) Displays the version.

* See Section 7.6 for details.

Toolbar

Table 7.3-2 Toolbar

Toolbar item

Description

New Creates a new production program.

Open Opens a production program.

Save Saves a production program that is being edited.

Print & Output to a file

Prints production program data and outputs it as text.

Undo

Cancels the operation you have done most recently and re-

stores the data to its original state.

Cut Deletes data and copies it onto the clipboard.

Copy Copies data onto the clipboard.

Paste Pastes data onto the clipboard.

Search Searches a placement ID or a component name.

Find Next Searches the next data.

Data Completion Status Displays each data completion status.

Line Explorer Displays/hides the Line Explorer.

Displays each data completion status.

Performs the Optimize function and allows you to specify the

optimization options.

Data Coherence Check

Checks coherence between a production program that is being

edited and a production line.