JANETS_INM - 第217页

JaNets In structio n Manual 7. Program Editor 7- 10 Item Conten ts Copy to BO C mark 3 The content s of cur rently display ed BOC mark settin g are co pied to BO C mar k 3 of t he currently display ed mach ine. H owev er…

JaNets Instruction Manual 7. Program Editor

7-9

Item

Contents

Detection margin (right)

Sets the upper width for mark detection.

Input range: 0.01 mm ~ (Visual field – Mark size)/2

Default: 1.50 mm

Lighting parameter, ver-

tical lighting

Sets the vertical lighting.

Input range: 0% ~ 200%

Default: 100%

Lighting parameter, an-

gle lighting

Sets the angle lighting.

Input range: 0% ~ 200%

Default: 100%

Lighting parameter, outer

ring lighting

Sets the outer ring.

Input range: 0% ~ 200%

Default: 0%

“Copy detail setting to

other marks” button

Copies the set mark information to other marks or the same model.

For details, refer to the “Copy the set mark information to other marks” screen.

OK button

Updates all the data set by detail setting and closes the screen.

The changed BOC mark is put to a production enable status and teaching is provision-

ally finished.

Cancel button

Throws away all the data set by detail setting and closes the screen.

When you press the “Copy the detail setting to other marks” button of the detail setting screen, the

contents of the setting are copied to other marks or the same model.

Figure 7.4-6 “Copy the detail setting to other marks” screen

Table 7.4-4 Setting items to copy the detail setting to other marks

Item

Contents

Copy to the same model

The contents of BOC mark setting of the currently displayed machine are copied to the

BOC mark of the same model set by the mark data group box.

If the same model does not exit, the contents will not be copied.

Copy to BOC mark 1 The contents of currently displayed BOC mark setting are copied to BOC mark 1 of the

currently displayed machine. However, if the BOC mark 1 position and mark name of

the circuit setting are not set or BOC mark 1 is a user ten-plate mark, this item cannot be

selected.

Copy to BOC mark 2

The contents of currently displayed BOC mark setting are copied to BOC mark 2 of the

currently displayed machine. However, if the BOC mark 1 position and mark name of

the circuit setting are not set or BOC mark 2 is a user ten-plate mark, this item cannot be

selected.

JaNets Instruction Manual 7. Program Editor

7-10

Item

Contents

Copy to BOC mark 3

The contents of currently displayed BOC mark setting are copied to BOC mark 3 of the

currently displayed machine. However, if the BOC mark 3 position and mark name of

the circuit setting are not set or BOC mark 3 is a user ten-plate mark, this item cannot be

selected.

Copy to the second BOC

mark 1

The contents of currently displayed BOC mark setting are copied to the second BOC

mark 1 of the currently displayed machine. However, if the second BOC mark 1 posi-

tion and mark name of the circuit setting are not set or the second BOC mark 1 is a user

ten-plate mark, this item cannot be selected.

Copy to the second BOC

mark 2

The contents of currently displayed BOC mark setting are copied to the second BOC

mark 2 of the currently displayed machine. However, if the second BOC mark 2 posi-

tion and mark name of the circuit setting are not set or the second BOC mark 2 is a user

ten-plate mark, this item cannot be selected.

Copy to the second BOC

mark 3

The contents of currently displayed BOC mark setting are copied to the second BOC

mark 3 of the currently displayed machine. However, if the second BOC mark 3 posi-

tion and mark name of the circuit setting are not set or the second BOC mark 3 is a user

ten-plate mark, this item cannot be selected.

Execute (G) button

The specified copy is executed. After execution, the dialog is closed. If no copy is

specified, the Execute button is disabled.

Cancel

No copy is executed and the dialog is closed.

When you click the “Teach Status” button, the “Teach Status” dialog box appears displaying the

statuses of the marks of each machine in the line.

If the BOC mark is not used, this dialog box does not appear.

Figure 7.4-7 “Teach Status” dialog box

Taught: Mark data is set.

Untaught: Mark data is not set.

Not use: This position is not used.

JaNets Instruction Manual 7. Program Editor

7-11

* Mark shape

The kinds of mark shape which an RX-7 series can define differ from those of machine types other

than an RX-7 series.

Set up the definition about a mark with an RX-7 series machine and "●" by default for the

JaNets.

Shape

Other than RX-7 series

RX-7 series

Existence or non-existence

shape

Existence or

non-existence of shape

Direction

●

Existence

－

○

Existence

－

○

(with outline)

Non-existence

Existence

－

■ Existence Existence －

□

Existence

－

□

(with outline)

Non-existence

Existence

－

▲

Existence

Upper

□

Existence

Upper

▼

Existence

Lower

□

Existence

Lower

▲

(To the right)

Existence

Right

△

(To the right)

Existence

Right

▲

(To the right)

Existence

Left

□

(To the Left)

Existence

Left

△

(with outline)

Non-existence

Existence

Upper

▽

(with outline)

Non-existence

Existence

Lower

△

(with outline,

to the right)

Non-existence Existence Right

△

(with outline,

to the left)

Non-existence Existence Left

◆

Existence

－

◇

Existence

－

◇

(with outline)

Existence

－

Existence Existence －

(white)

Non-existence Existence －

(with outline)

Non-existence Existence －

Existence Existence Upper

(white)

Non-existence Existence Upper

(with outline)

Non-existence Existence Upper

Existence Existence Lower

(white)

Non-existence Existence Lower

(with outline)

Non-existence Existence Lower

Template

Existence

Non-existence

－