JANETS_INM - 第25页

JaNets Instr ucti on Man ual 1. Overview 1- 12 1.6.2 Line Manage r option The operati on flow up to P WB pro duction, wh en the Line Mana ger option is a dded to Bas ic Editor, is show n b elow . A data shift using the U…

100%1 / 755
JaNets Instruction Manual
1. Overview
1-11
Flow of PWB Production with JaNets
1.6.1 Basic Editor
The operation flow up to PWB production using Basic Editor is shown below.
<Movement of the data from the JaNets by using a USB flash memory>
For the RX-6, copy the production program (division file) created by a "Data creation" command to a
USB flash memory, and save in a drive D drive on a main unit side. For the RX-7, read a production
program from a USB port. Refer to the section “File Management (Explorer)” of the Instruction
Manual of the main unit.
Note: Never save any program to the drive C of the main unit.
<The notes at the time of production execution when the data is transferred with a USB flash memory
(RX-6)>
Use a production program of the main unit to produce PWBs.
Be sure to remove the USB flash memory stick.
Create Data
Component Database
: Creation of a production
program (execution of
optimization)
Use a USB flash memory stick
to copy a production program.
Shared function
: Configuration of a machine
: Registration of
component information
JaNets Instruction Manual
1. Overview
1-12
1.6.2 Line Manager option
The operation flow up to PWB production, when the Line Manager option is added to Basic Editor, is
shown below.
A data shift using the USB flash memory can be
performed in the same way as Basic Editor.
Create Data
: Conversion of external data
into JUKI data (optional)
: Creation of a production
program (execution of
optimization)
: Time measurement by
optimized production
program
Shared function
: Optimization of feeder
setting change
Component Database
: Registration of
component information
: Configuration of a floor, line and
machine
: Viewing usage status of
ID-equipped nozzles
Production
: Downloads of a production
program, and uploading of them
after PWB production
JaNets Instruction Manual
1. Overview
1-13
When a Line Manager option and an Equipment Manager option are added to Basic
Editor
The operation flow up to PWB production to be applied when a Line Manager option and an
Equipment Manager option are added to Basic Editor is shown below.
Although data can be transferred to/from a mounter
with a USB flash memory stick, data transfer to/from
a printer/an inspection machine can be enabled only
during online PWB production.
: Viewing usage status of
ID-equipped nozzles
Create Data
: Conversion of external data
into JUKI data (optional)
: Creation of a production
program for a mounter
Association of a printer
program and an inspection
machine program
(Execution of optimization)
: Creation of a production
program with a printer/an
inspection machine
: Optimization of feeder
setting change
Production
: Downloads of a production
program, and uploading of them
after PWB production
Shared function
: Configuration of a floor, line
and machine
: Registration of component
information
: Time measurement by
optimized production program
RV