JANETS_INM - 第280页

JaNets In structio n Manual 7. Program Editor 7- 73 Extended A r ray ” setting screen This scree n allows y ou to set the det ailed in formatio n on an irregu lar ball p attern such as t he el- ement assignm en t and dim…

100%1 / 755
JaNets Instruction Manual 7. Program Editor
7-72
Elementdetails setting screen
This screen allows you to set the detailed information on an element such as an element type,
assignment and dimensions.
According to the setting in the Typefield, the following screen appears.
The example below shows the screen for setting an Outer Lead/Inner Lead.
Figure 7.4-112Outer Lead/Inner Leadsetting screen
Switch the element type here.
When you switch the element type in theType
field, this column changes to the Ball/Land,
Column,” “INS pin” “Mark” or “Cornercolumn
JaNets Instruction Manual 7. Program Editor
7-73
Extended Arraysetting screen
This screen allows you to set the detailed information on an irregular ball pattern such as the el-
ement assignment and dimensions.
Figure 7.4-113Extended Arrayscreen
Enter up to 32 half-width alphanumeric characters to specify a name.
Enter the coordinates of a ball
to be checked viewed from the
center of a component.
No.: Displays the element number.
Type: Displays the element type.
Complete: Displays OKwhen an el-
ement is created completely, or
NGwhen it is not.
JaNets Instruction Manual 7. Program Editor
7-74
Edit outline element groups graphicallyscreen
When you select a bitmap with a mouse, you can set an outline element group easily.
Figure 7.4-114Edit outline element groups graphicallyscreen
List of ball patterns and the Preview Ball Patternscreen
This screen displays the registered ball patterns in the tree view, and reflects the selected pattern
in data.
Figure 7.4-115Preview Ball Patternscreen
Positions to which
you can add an
element group
The selected pat-
tern is displayed on
the screen.
Displays the total number
of element groups (you
cannot enter this field).
Corner: displayed in red.
Side: displayed in blue.