JANETS_INM - 第345页

JaNets In structio n Manual 7. Program Editor 7- 138 Importing data from the database The [Import ] com mand dis plays the l ist of the regi stere d data from th e databas e, and then i mports data. Y ou can impor t the …

JaNets Instruction Manual 7. Program Editor

7-137

The message above asks you whether to display the list of tray size over components or not.

When you select the <Yes> button on this message, the list of the tray size over components ap-

pears on the screen.

Figure 7.6-33 List of the tray size over components

Registering data into the database

The [Export to Database] command registers Component data into the database. To register

Component data into the database, execute this command on the edit screen of the respective

data type.

* You can register neither Pick data nor mark data into the database.

* When you select the “Yes ” radio button for the menu item “Notification of Database Entry Com-

pletion” on the “Set Environments” screen, the corresponding message appears on the screen.

* For a tray component, if any of values set in the “Pilot Position,” “Pitch between Components” and

“No. of Columns/Rows” of the “Packaging Style” data of the obtained Component data is different

from that of the existing data, the error message appears on the screen.

Production program name

Component data record number and com-

ponent name

JaNets Instruction Manual 7. Program Editor

7-138

Importing data from the database

The [Import] command displays the list of the registered data from the database, and then imports

data. You can import the following data: Component data, Pick data and Mark data. How to import

each type of data is described below.

(1) Component data

From the “Placement Data” screen: this command assigns a name to a component not set

yet, and imports its Component data.

* You cannot import Component data to Placement

data to which Component data is assigned already.

From the “Component Data” screen: this command replaces the selected Component data

with that registered in the database.

Figure 7.6-34 “Component Database List” screen

* When the system imports information from the component database, it does not replace setting

of the “Component Skip” made on the “Placement Conditions General Setting.”

* When the system imports information from the component database, the “Search through

Component Database” screen appears. It displays the data matched with the search require-

ments on the list. (This operation is applicable only when the Data Manager is available.)

Tree view

Select Comp Type: Displays the data on all component types registered in the database.

OK: Replaces the component data information with that regis-

tered in the database.

Refresh: Updates the displayed information to the latest one.

Search: Displays the screen for searching a component.

JaNets Instruction Manual 7. Program Editor

7-139

7.6.6 Descriptions of the “Tools” menu commands

Merge Production Program

This command loads the specified production program into the system to paste it.

Table 7.6.4 PWB configuration after the [Merge Production Program] command is executed

Reference data Paste source data

PWB configuration after the [Merge

Production Program] command is executed

Single-plane

Matrix circuit

Single-plane

Non-matrix circuit

Single-plane

Matrix circuit

Single-plane

Matrix circuit

Single-plane

Non-matrix circuit

Single-plane

Non-matrix circuit

Single-plane

Matrix circuit

Single-plane

Non-matrix circuit

Single-plane

Reference data: a production program loaded with the Program Editor

Paste source data: a production program loaded with the [Merge Production Program] com-

mand

Example: When two or more different circuits are to be placed on a board, a production program is

created as one for a single-place PWB.

①

Starting up the [Merge Production Program] command

Figure 7.6-35 Menu for selecting the [Merge Production Program] command

* Unless PWB data of the reference production program is created completely, this menu is

disabled.

② Selecting the paste source production program

Select a production program on the “Open” dialog box that is displayed with the operation at

Step 1.

③ Checking the execution

The dialog box for confirming the merge operation appears on the screen. When you select

the <Yes> button on this dialog box, the system starts merging these two production pro-

grams.

④ Completion message

After the two production programs are merged successfully, the message for notifying you of

completion of the [Merge Production Program] command appears on the screen. When you

select the <OK> button, the system closes this message.

Reference production

program A

Paste source production

program B

Single-plane PWB (A + B)

Execution of the [Merge

Production Program]

command