JANETS_INM - 第385页
JaNets In structio n Manual 7. Program Editor 7- 178 If the syst em is not conn ected t o the databa se or if com municatio n is cut dur ing connect ion to t he database, the fol lowing di alog box appears on t he s cree…
JaNets Instruction Manual 7. Program Editor
7-177
7.8.2 Executing the automatic batch loading function
If the menu item “Automatic batch loading of Component data” or “Automatic batch loading of
Mark data” is set to “Yes” on the “Set Environments” screen when you press the <Go> button on
the “Optimize” dialog box, the system accesses to each database to update data of a production
program. After updating data, the system performs optimization.
* A production program is automatically saved before automatic batch loading starts.
When automatic batch loading starts, the system accesses to the database. While the system is
accessing to the database, the following dialog box appears on the screen.
Figure 7.8-3 Dialog box displayed during accessing to the database
Only if updating of Component data that affects the optimization result occurs after updating fin-
ishes, the following dialog box appears on the screen.
Figure 7.8-4 Confirmation dialog box for change of Component data
When you press the <Update and optimize> button, the system performs optimization with apply-
ing the updating.
When you press the <Optimize without updating> button, the system restores the production pro-
gram to the original state before the automatic batch loading function is executed, and then per-
forms optimization. When you press the <Cancel> button, the system restores the production
program to the original state before the automatic batch loading function is executed without per-
forming optimization.
* When the “Skip confirmation by alternation” check box is enabled on the “Set Environments”
screen, the system automatically updates the data and performs optimization without displaying
the confirmation dialog box above.
The number of production programs that
finish being updated and that of produc-
tion programs that will be updated are
displayed here.
JaNets Instruction Manual 7. Program Editor
7-178
If the system is not connected to the database or if communication is cut during connection to the
database, the following dialog box appears on the screen. When you press the <Yes> button, the
system restores the production program to the original state before the automatic batch loading
function is executed, and then performs optimization. When you press the <No> button, the
system only restores the production program to the original state before the automatic batch
loading function is executed without performing optimization.
Figure 7.8-5 Dialog box indicating a failure to connect to the database
JaNets Instruction Manual 8. Job Optimizer
8-1
Job Optimizer
What is the Job Optimizer?
This function optimizes two or more production programs to reduce the number of times required
for changing feeders.
Starting Up or Quitting the Job Optimizer
Start: From the JaNets launcher, double-click the “Job Optimizer” icon of the data creation tab.
Quit: Select the [File] command, and then the [Job Optimizer] command from the “File” menu, or
click the < > button located at the upper right corner of the screen.
Figure 8.1-1 “Job Optimizer” initial start-up screen
* When you start up the Job Optimizer for the first time, no line is selected
yet because you are supposed to make a new reservation list. When you
start it up for the second time or later, the line selected when you quitted
the Job Optimizer is selected at start-up.
Line