JANETS_INM - 第393页
JaNets Instr ucti on Man ual 8. Job Optim izer 8-8 Main screen – Reserv atio n list d etai led d ata displ ay area When no data i s displaye d in the deta iled dat a displ ay area at all, the product ion program reservat…
JaNets Instruction Manual 8. Job Optimizer
8-7
8.3.3.2 Reservation File
If you change the existing floor name, line name or line configuration with Shopfloor Setup, the
corresponding line name or line configuration specified in a reservation file is not changed
accordingly.
Therefore, when you display them with the Program Explorer, a list of reservation files may be
displayed under a floor or production lien that does not exist.
To use such a reservation file, open it again, and then save it for the production line that is being
used.
Figure 8.3-7 Program Explorer
(Reservation File)
Figure 8.3-8 Program Explorer
(Floor Configuration)
Main screen – Displaying the Reservation list
Up to 100 production programs can be reserved. You can set the columns that are always
displayed even though you scroll the screen horizontally.
For the method of setting the column to be fixed, refer to “8.3.27 Set Environments.”
Figure 8.3-9 Main screen – Reservation list
You can adjust the width of each column.
The floor name, production line name and
production line configuration that are to be used
are displayed here.
* A floor(s) and a production line(s) that do not
exist are displayed in red.
Production
programs (*.iss
format): displayed
in order of
reservations.
* You cannot
operate these
programs on this
screen.
Reservation file (*.rsv format)
JaNets Instruction Manual 8. Job Optimizer
8-8
Main screen – Reservation list detailed data display area
When no data is displayed in the detailed data display area at all, the production program
reservation area is expanded and displayed over the detailed data display area.
Figure 8.3-10 Main screen – Detailed data display area
Creating a new reservation file
Figure 8.3-11 [File] – [New]
Select the [File] command and then the
[New] command from the “File” menu, or
click the “New” ( ) tool from the toolbar.
* While you are editing the reservation list,
the “Confirmation to change” message
appears on the screen.
JaNets Instruction Manual 8. Job Optimizer
8-9
Opening a reservation file
8.3.7.1 Opening a reservation file from the local
Figure 8.3-12 [File] – [Open]
When you open a reservation file on the “Open” dialog box, the contents of the selected
reservation file are displayed on the Reservation list, and the line selected when you created the
reservation file is automatically selected.
If the line ID of the reservation file does not exist, the following message appears on the screen.
Figure 8.3-13 “Line ID confirmation” message (display of the Line Configuration)
Select the [File] command, and then the [Open] command from the “File” menu, or click the “Open”
( ) tool from the toolbar. The “Open” dialog box appears on the screen.
* The initial folders for the “Open” dialog box is: “reservation file of the selected line (that is to be set
with the Shop Floor Setup)” + “ year (four-digit)” folder + ”month (two-digits)” folder.
(Example: C:
\
Juki
\
JaNets
\
Data
\
Line00
1\
2008
\
01
\）
* Opening a reservation file:
While you are editing a Reservation list,
the “reservation data change
confirmation” message appears on the
screen.
<Yes> : Opens the reservation file of the line being selected.
<Details>: Displays the line configuration of the reservation file.