JANETS_INM - 第419页
JaNets Instr ucti on Man ual 8. Job Optim izer 8- 34 Feeder Se tup Information Figure 8.3 - 63 Main scr een – [V iew] – [Feeder Setup] Figure 8.3 - 64 “ Feeder Setup Informati on ” ① Select the [V iew] command, a nd then…
JaNets Instruction Manual 8. Job Optimizer
8-33
Divided Placement Data
Figure 8.3-60 Main screen – [View] –[Divided Placement Data]
The divided placement data for the production program selected from the Reservation list is
displayed on the Detailed data display area.
Figure 8.3-61 “Divided Placement Data” (Input Order)
Figure 8.3-62 Divided Placement Data (Optimized Order)
When “Yes” is set in the Skip” field of the
“Placement” data screen or “Component” data
screen, the background color of the line is
displayed in orange.
When you select the “Optimized Order” radio button, the background
color of lines is switched between the normal one and the colored one
every time components are paired (to be picked up at the same time)
during the cycle of a pick-up and placement operation.
Select the radio button “Input
Order” or “Optimized Order.”
①
After selecting one line from the
Reservation list displayed on the
Main screen, and select the [View]
command, and then the [Divided
Placement Data] command from the
“View” menu.
* If optimization is not executed yet,
if you change a production program
after optimizing it, or if no line is
selected on the Reservation list, you
cannot select this command.
JaNets Instruction Manual 8. Job Optimizer
8-34
Feeder Setup Information
Figure 8.3-63 Main screen – [View] – [Feeder Setup]
Figure 8.3-64 “Feeder Setup Information”
①
Select the [View]
command, and then the
[Feeder Setup
Information] command.
* If cluster-optimization is
not executed yet or if you
change a production
program after
cluster-optimizing it, you
cannot select this
command.
This area indicates how feeders of each production program are assigned and whether
feeders within the cluster have to be replaced as a result of execution of
cluster-optimization or not.
JaNets Instruction Manual 8. Job Optimizer
8-35
Status Display
Figure 8.3-65 Main screen – [View] – [Status]
Figure 8.3-66 “Status”
①
After selecting one line on the
Reservation list, select the [View]
command, and then the [Status ]
command from the “View” menu.
* If the “tact simulation” (cycle time
simulation) is not performed after
optimization is executed or if no line is
selected from the Reservation list,
you cannot select this command.