JANETS_INM - 第445页
J aN et s Instr ucti on M anua l 9. Tact S imul at ion 9-3 M enu Co nfi g urati o n 9.2 Tab l e 9.2 -1 Descri ption of each menu item Menu ite m Descript ion File O p en Displays t he “Ope n” dialog box . Save as Display…
JaNets Instruction Manual 9. Tact Simulation
9-2
② Select the [Ta c t Simulation] command from the menu bar of the Program Editor, and then
the [Ta c t Simulation] command from the displayed menu to start up the Ta c t Simulation. In
this case, you have to create a production program completely, and optimize it in advance.
The production program loaded at this point is to be measured. After the Ta c t Simulation
starts up, you can select another production program. The displayed screen varies de-
pending on whether any production program is loaded or not (see Sections 9.3.1.1 and
9.3.1.2).
Figure 9.1-2 Starting up the Tact Simulation from the Program Editor
Figure 9.1-3 Quitting the Tact Simulation
Select this command to start
up the Tac t Simulation.
Select this command to quit
the Tact Simulation
JaNets Instruction Manual 9. Tact Simulation
9-3
Menu Configuration 9.2
Table 9.2-1 Description of each menu item
Menu item
Description
File
Open
Displays the “Open” dialog box.
Save as
Displays the “Save as” dialog box for a result file.
Print
Displays the “Print Options” dialog box.
Exit Tact Simulation
Returns to the Program Editor after quitting the Tact Sim-
ulation.
Execute
Measure
Displays the “Simulation Conditions” screen.
View
Line Explorer (E)
Displays/hides the Line Explorer
Toolbar
Displays/hides the toolbar.
Status Bar
Displays/hides the status bar.
Tools
Set Environments
Displays the “Set Environments” dialog box.
Window
Result and Log
Displays the “Result and Log” screen.
Help
About
Displays the version information of the Tact Simulation.
Toolbar
Table 9.2-2 List of tools of the toolbar
Toolbar items
Description
Open Displays the “Open” dialog box (production program/result and log file).
Save as Displays the “Save as” dialog box (saves a result and log file).
Print Prints production program data.
Measure Displays the “Simulation Conditions” screen.
Line Explorer Hides or shows the Line Explorer.
JaNets Instruction Manual 9. Tact Simulation
9-4
Operating Procedure 9.3
“Simulation Conditions” setting screen 9.3.1
9.3.1.1 When there is a production program
The “Simulation Conditions” screen appears.
Figure 9.3-1 “Simulation Conditions” setting screen.
Figure 9.3-2 “Simulating” screen
When the system finishes measuring, the “Result and Log” screen appears.
No. of PWBs: Enter the number of PWBs whose
component placement to be simulated.
PWB Load Time: Enter the interval for loading a
PWB.
Line Simulation: Measures the entire line. The
“Optimized Order” radio button is selected as
the “Sequence” and you cannot change this
setting. The system simulates transporting a
PWB and measures the required time only for
a machine not selected.
Machine Simulation: Measures machines only.
You can select either the “Input Order” radio
button or the “Optimized Order” radio button
as the “Sequence.” When you select two or
more machines, the <Measure> is disabled.
Machine List: Select a machine(s) to be measured.
When you click the <Select All> button, the system
selects all machines. Note that this <Select All>
button is enabled only you select the “Line Simula-
tion” radio button.
<Measure>: Starts measuring and displays
the “Simulating” dialog box on the screen.