JANETS_INM - 第448页
J aN et s Instr ucti on M anua l 9. Tact S imul at ion 9-6 The f i les t hat can b e rea d are as f ol low s: Tab l e 9.3 -1 Read able fil es File ty pe s Descrip tion Product i on program ( *.i ss ) Product i on program…
JaNets Instruction Manual 9. Tact Simulation
9-5
9.3.1.2 When there is not any production program
The blank progress window appears on the screen.
Figure 9.3-3 Progress window (blank) and toolbar
Opening a production program/result and log file 9.3.1.2.1
Select the [File] command from the menu bar of the progress window, and then the [Open]
command from the “File” menu. Specify a file to be loaded on the displayed “Open” dialog box.
Figure 9.3-4 “Open” dialog box for a production program
* If the specified file is damaged, you cannot open any file.
Measure button: displays the “Simulation Con-
ditions” screen.
* When the Measure button above is displayed in
gray, you cannot display any simulation screen.
You have to load a production program into the
system (see Section 4.3.1.2.1).
Specify a file to be loaded.
To specify a production program: Select the [Execute] command on the
progress window. The “Measure” menu command is enabled.
To specify a result and log file: Display the loaded log on the “Result and
Log” screen, and select the [Execute] command on the progress win-
dow. The [Start] menu command is enabled.
JaNets Instruction Manual 9. Tact Simulation
9-6
The files that can be read are as follows:
Table 9.3-1 Readable files
File types
Description
Production program (*.iss)
Production program file created with JaNets
Result log (*.gxl)
Log file simulated with Tact simulation
Optimized division file (*.i01 to *.i10)
Division file for each machine created after optimization with
JaNets Program Editor
Optimized division file (*.m01
to
*.m10)
Division file for each machine created with the LC-01 Pro-
gram Editor
2050, 2050R format file (*.e45)
Production program file created with 2050 or 2050R
2055R, 2060, 2060R format file (*.e46)
Production program file created with 2050, 2060, or 2060R
2070 format file (*.e47)
Production program file created with 1070 (*) or 2070
2080, 2080R format file ( *.e48)
Production program file created with 2080 or 2080R
3020, 3020R format file (*.x21)
Production program file created with 3020 or 3020R
3010,3010A format file (*.x11)
Production program file created with 3010 or 3010A
3020V, 3020VR, 3020VA, 3020VRA
format file (*.x21)
Production program file created with 3020V, 3020VR, 3020VA
or 3020VR
FX-3, FX-3R, FX-3RA format file (*.x01)
Production program file created with FX-3, FX-3R or FX3RA
RX-6, RX-6R format file (*.j01x)
Production program file created with RX-6 or RX-6R
RX-7 format file (*.prd)
Production program file created with RX-7
RS-1 format file (*.s01x)
Production program file created with RS-1
2077 format file (*.x4d)
Production program file created with 2077
JM-10 format file (*.e71)
Production program file created with JM-10
JM-20 format file (*.X41)
Production program file created with JM-20
JM-100 format file (*.s30x)
Production program file created with JM-100
* When you specify an optimized division file and a production program in main unit format, specify
a line by a line explorer before file reading.
* When measuring the optimized division file and the production program in main unit format, sim-
ulation is performed in an "independent simulation" mode.
JaNets Instruction Manual 9. Tact Simulation
9-7
Setting the environment 9.3.2
This is the screen that allows you to set the display conditions of the progress window and
those of the “Result and Log” screen.
Figure 9.3-5 “Set Environments” screen
Set the items to be displayed by default with
the corresponding check boxes.