JANETS_INM - 第494页
JaNets Instr ucti on Man ual 12 . Machine Program R elater 12 - 12 Canceling t he relation between a new production line and an old one Perform the op eratio ns ① and ② below . Figure 12.3 - 13 Canceling of relati on bet…
JaNets Instruction Manual 12. Machine Program Relater
12-11
When you click a machine of an old production line to be related to a new one, machines on the
new production line you can select are highlighted.
Figure 12.3-11 Relating an old production line to a new production line (highlighted)
When you click a machine you can select on the new production line, a line is displayed between
the selected old production line and the new production line.
Figure 12.3-12 Relating an old production line to a new production line (combined)
When you click a machine of another old
production line to be related to a new
production line, you can continue relating
production lines.
When you click the <Match> button, the
system enters Relation mode, and the
<Match> button is switched to the <Matched>
button. When you click this <Matched> button,
you quit Relation mode.
Click a machine of the old production line
to be related to a new production line.
JaNets Instruction Manual 12. Machine Program Relater
12-12
Canceling the relation between a new production line and an old one
Perform the operations ① and ② below.
Figure 12.3-13 Canceling of relation between the new production line and
the old production line
The line indicating the relation disappears from the screen.
Figure 12.3-14 Canceling of a relation between the new production line and
the old production line
②
Click a machine whose relation is to be
canceled on an old production line.
① Click the <Match> button to put
the system into Relating mode.
JaNets Instruction Manual 12. Machine Program Relater
12-13
Specifying the target data path
Specify the target path of a production program to be related with the batch process on the “Batch”
relating screen.
Figure 12.3-15 Specifying the target data path
The "Batch" relating function updates a production program already created for an old line in order
to assign the same program to a new line at a time. The new line needs to contain the same
machines as the old line.
For “Target path”, specify a folder that has a production program and the divided files that you
want to relate. (If there is no divided file, a program for the “PWB Pass-through mode” is
assigned.); However, the sub folder of the specified target path is not related.
You also can specify a path that you specified on the old line. In that case, the production program
specified on the old line is related as well.
Executing a batch relation
Click the <Relate> button on the “Batch” relating screen. When you execute the relation process,
the system automatically backs up the specified file to the destination specified in section 12.3.4
“Setting the environment,” and executes the overwrite process for production programs that match
the configuration of the old production line of all production programs that exist on the target data
path.
* Production programs for Idle mode are automatically generated for machines of a new
production line not related to an old production line.
The Batch relation is not executed under the conditions as follows:
● When the transport direction differs between the old line and the new line;
● When the divided files corresponding to the target path is incomplete;
● When the transport direction differs between the new line and the production program
corresponding to the target path.
● The same name files, one’s extension is iss and another’s extension is mic, are located on the
target data path.
When you click the <Browse> button, the “Open” dialog box appears on the
screen. Specify a file and click the <Open> button on this dialog box. Note that
you can specify a production program whose extension is “*.iss” or “*.mic” only.