JANETS_INM - 第574页

JaNets Instr ucti on Man ual 13 . Program D ownloa der 13 - 78 T able 13.16 - 19 T ra y/MTS information (JM -20 /JM - 100 ) ID code Label (Title) Description T ray/MTS information 17 FeederBankK ind Feeder ban k type Ste…

100%1 / 755
JaNets Instruction Manual 13. Program Downloader
13-77
Table 13.16-17 Head information (JM-20/JM-100)
ID code
Label (Title)
Description
Head information
15
HeadNo
Head unit
HeadId
Head ID
PickedNum
Number of times a component was picked up successfully
PlacedNum
Number of times a component was placed on a board successfully
PickErrorNum
Number of component pick-up errors
FallCompoNum
Number of times a component dropped off the machine
TakeoutCompoNum
Number of times a component was returned without being placed on a board
LaserErrorNum
Number of laser errors
DiffCompoErrorNum
Number of odd-shaped component errors
TombErrorNum
Number of tombstone chip errors
PosCompoNum
Number of component posture errors
AngleCompoNum
Number of component angle errors
VisionErrorNum
Number of image recognition errors
PolarityErrorNum
Number of polarity inspection errors
LeadBendErrorNum
Number of bent lead errors
PickPosErrorNum
Number of component pick-up position errors
ScrapNum
Frequency of component scrap
CompoDirectionErrorNum
Number of component direction determination errors
InsertDimensionErrorNum Number of insertable component judgment out of range errors
CompoInsertErrorNum Number of component insertion error detection errors
LeadCorrectionErrorNum Number of correction failures
OtherErrorNum Number of other errors
Table 13.16-18 Feeder information (JM-20/JM-100)
ID code
Label (Title)
Description
Feeder information
16
FeederBankKind
Feeder bank type
HoleNo
Feeder hole number
LaneNo
Lane number
CompoName
Component name
PickedNum
Number of times a component was picked up successfully
PlacedNum
Number of times a component was placed on a board successfully
PickErrorNum
Number of component pick-up errors
NoCompoNum
Number of component run-out errors
DiffCompoNum
Number of odd-shaped component errors
ErrorVacNum
Number of retry-over errors
LaserErrorNum
Number of laser errors
VisionErrorNum
Number of image recognition errors
TombErrorNum
Number of tombstone chip errors
LeadBendNum
Number of bent lead errors
PosCompoNum
Number of component posture errors
AngleCompoNum
Number of component angle errors
TakeoutCompoNum
Number of times a component was returned without being placed on a board
FallCompoNum
Number of times a component dropped off the machine
CompoDirectionErrorNum
Number of component direction determination errors
InsertDimensionErrorNum
Number of insertable component judgment out of range errors
CompoInsertErrorNum
Number of component insertion error detection errors
LeadCorrectionErrorNum
Number of correction failures
OtherErrorNum
Number of other errors
JaNets Instruction Manual 13. Program Downloader
13-78
Table 13.16-19 Tray/MTS information (JM-20/JM-100)
ID code
Label (Title)
Description
Tray/MTS information
17
FeederBankKind
Feeder bank type
StepNo
Step number
CompoName
Component name
PickedNum
Number of times a component was picked up successfully
PlacedNum
Number of times a component was placed on a board successfully
PickErrorNum
Number of component pick-up errors
NoCompoNum
Number of component run-out errors
ErrorVacNum
Number of retry-over errors
LaserErrorNum
Number of laser errors
VisionErrorNum
Number of image recognition errors
LeadBendErrorNum
Number of bent lead errors
PosCompoNum
Number of component posture errors
AngleCompoNum
Number of component angle errors
TakeoutCompoNum
Number of times a component was returned without being placed on a board
CompoDirectionErrorNum
Number of component direction determination errors
InsertDimensionErrorNum
Number of insertable component judgment out of range errors
CompoInsertErrorNum
Number of component insertion error detection errors
LeadCorrectionErrorNum
Number of correction failures
OtherErrorNum
Number of other errors
Table 13.16-20 Production management information (RV-1/2/2-3D)
ID code
Label (Title)
Description
Production management information
18
MachineName
Machine name
MachineFunction
Machine function
As for an inspection machine, the machine function is fixed to “INSPECTER.”
ProdutionNum
Planned number of PWBs to be produced
SystemProgramName
Names of files that are related to production and downloaded with JaNets
MachineProgramName
Name of a production program used for production with the machine
Table 13.16-21 Production management information (RP-1)
ID code
Label (Title)
Description
Production management information
19
MachineName
Machine name
MachineFunction
Machine function
As for a printer, the machine function is fixed to “PRINTER.”
ProdutionNum
Planned number of PWBs to be produced
SystemProgramName
Names of files that are related to production and downloaded with JaNets
MachineProgramName
Name of a production program used for production with the machine
JaNets Instruction Manual 13. Program Downloader
13-79
Table 13.16-22 Inspection information (RV-1/2/2-3D)
ID code
Label (Title)
Description
Inspection information
21
CnvrLaneId
Conveyor lane ID
0: Front lane or single-lane machine
1: Rear lane
ProductNum
Number of produced PWBs
ProductCir
Number of produced circuits
EndProductionCode
Termination code for end of PWB production
0: Normal
1: Abnormal
TimeCycle
Cycle time
TimeProduction
Production time (hour:minute:second)
TimeInspection
Inspection time (hour:minute:second)
TimeJudgement
Judgment time (hour:minute:second)
QualifiedProductionNum
Number of qualified PWBs
QualifiedProductionCircuit
Number of qualified circuits
Side
Inspected side of a PWB
0: Side A
1: Side B
InspectStartTime
Inspection start date and time
InspectMode
Inspection mode
0: Auto mode
1: Semi-auto mode
2: Remote mode
InspectResult
Inspection result
0: OK
1: NG
JudgeResult
Judgement result
0: OK
1: NG
BoardCode
Board barcode
SubBoardCode
Barcode character string of each circuit
Each barcode character string is connected with “,” (comma), and then
output.
BadMark
Existence of a bad mark of each circuit
0: No bad mark
1: with a bad mark
When all of three circuits have no bad mark, “000” is output. When only
the second circuit of three circuits has a bad mark, “010” is output. In
this way, existence of a bad mark of each circuit is output continuously.
NgStepCount
Number of NG components
StepCount
Total number of inspected components
Table 13.16-23 Print information (RP-1)
ID code
Label (Title)
Description
Print information
22
ProductNum
Number of produced PWBs
TimeTact
Takt time
TimeCycle
Cycle time
TimeMarkRetry
Mark retry time (hour:minute:second)
TimeTransportWaitIn
Board load waiting time (hour:minute:second)
TimeTransportWaitOut
Board eject waiting time (hour:minute:second)
TimeTotal
Accumulated time (hour:minute:second)