JANETS_INM - 第70页
JaNets Instr ucti on Man ual 2. Install ation 2- 42 In order to per form on - l ine product ion, creat e the fo llowing set up. Click the "Env ironm ent" but ton and set up t he item of a file/fold er managem e…
JaNets Instruction Manual 2. Installation
2-41
2.5.2 Procedure for setting up an RX-7 series
To set up an RX-7 series, click the [Machine Setup] menu command from the “top menu” to display
the “Machine Setup” screen.
Next, click the menu item “Environment Setting,” and then set the IP address and the sub net
mask according to your communication environment.
After setting the IP address and the sub net mask, click the <Update> button.
Figure 2.5-18 Screen for setting the machine environment
JaNets Instruction Manual 2. Installation
2-42
In order to perform on-line production, create the following setup.
Click the "Environment" button and set up the item of a file/folder management as follows.
Figure 2.5-19 Environment setting screen (File/Folder management)
Moreover, set up the item of host communication as follows.
Figure 2.5-20 Environment setting screen (Host communication)
Click the "Update" button when you compete the above-mentioned setup.
You have finished setting up communication of the RX-7 series at this point.
JaNets Instruction Manual 2. Installation
2-43
2.5.3 Procedure for setting up an RP-1 or an RV series machine
A service engineer is supposed to make the settings of each machine according to the “Procedure for
setting up an RP-1 or an RV series machine.”
2.5.3.1 Creating a user account
To communicate with a PC, create a user account for the machine.
The name of the account to be created is “isuser,” and the corresponding password is
“is_user_2008.”
(1) Click the “Computer” on the Start menu of the Windows running on the machine main unit with
the right button. When the menu appears on the screen, click [Manage].
Figure 2.5-21 Start menu of the RP/RV series machine
(2) Click with the right button the “Users” on the “Local Users and Groups” tree displayed on the left
side of the screen. When the menu shown below appears on the screen, click [New User].
Figure 2.5-22 “Computer Management” screen