DS-FX-940UV-NordsonASYMTEK
Conformal coatings used by electroni c manufa cture rs contain UV indicato rs for the purpose of inspectio n. Since coating s are trans paren t, units must be view ed under black light in order to v erify cov erage and n…
Conformal coatings used by electronic manufacturers contain
UV indicators for the purpose of inspection. Since coatings are
transparent, units must be viewed under black light in order to
verify coverage and non-coverage. The Nordson ASYMTEK
FX-940UV makes inspection of conformal coatings simple and
convenient by automating the inspection process for quality and
consistency of coatings.
Advanced High Power UV Lighting and newly available image
processing technology integrate several techniques, including
coverage inspection, color inspection, normalized correlation and
rule-based algorithms, to provide complete inspection coverage
with an unmatched low false failure rates.
With minimal programming, the inspection set-up is fast and
intuitive typically requiring less than 30 minutes. A known good
board is used to learn the coverage and non-coverage areas.
The automated inspection typically takes only a few seconds
with inspection results immediately displayed. These results
can be stored and reviewed off-line. The FX-940UV also
reads all common barcodes and captures board images for
product traceability.
Features:
• Top down and optional side viewing cameras
• Proprietary UV lighting
• 100 mm clearance for tall components
• Traceability
• Optional thickness measurement
Automated Inspection for:
• Conformal coat coverage
• Micro Coatings / dispensed materials
• Flux coverage
• Selected areas of non-coverage
• Delamination / cracks and bubbles
• Part presence / Correct part / polarity
• SPC, barcode reading and archiving of
board image with inspection results
• Includes SMT and THT
component inspection
FX-940UV ACI / AOI
Automated conformal coat inspection
For more information,
visit our website to
l
ocate your local
representative or
contact your regional
office:
nordsonasymtek.com
info@nordsonasymtek.com
North America
Headquarters
Carlsbad, CA
China
Shanghai
Beijing
Guangzhou
Taipei
EMEA
Deurne, Netherlands
S.E. Asia/Australia
Singapore
Korea
Seoul
Japan
Tokyo
India
Chennai
Nordson ASYMTEK
+1.760.431.1919
2747 Loker Avenue West
Carlsbad, CA, USA 92010
Copyright © 2018 NordsonASYMTEK (2018-04-10)
Specifications
Inspection Capabilities
T
hroughput: Up to 30 sq. in./ sec. (194 sq. cm)
M
aximum Board Size: 18.5” x 19” (470 x 482mm)
Clearance: 4” (100mm) top and bottom
Optional Upgrade: 4 side angle cameras, Board flipper
Defects Detected: Coatings and dispensed material coverage, non-coverage,
cracks and delamination, SMT and THT part defects.
Software
Algorithms: Conformal Coating Inspection
Color detection, OCV, OCR, Barcode recognition,
both image and rules based algorithms.
Data Requirements: None
CAD Translation Package: Not required
Programming Skill Level: Technician or operator
Operating System: Windows 7
Off-line Software: Optional - Rework, Review and Program Creation
SPC Software: Real-time local and remote monitoring of first
pass yield, defect trends, and machine utilization.
Data Outputs: Text, SQL, ODBC, MS Access, XML
Hardware
Imager: Proprietary UV red and blue LEDs
Up tp 18 megapixel color imaging sensor
23, 12 or 8 micron pixel size
Facilities
Power: 110-220 VAC, 50/60 Hz, 15 amps
Footprint: 39” x 52” x 60” (1000mm x 1329mm x 1531mm)
Weight: 950 lbs (430 kg)
Machine Installation: < .5 hour
FX-940UV ACI / AOI Automated conformal coat inspection
Side angle viewing cameras.
Defect image of missing conformal coat.Automated inspection for conformal coat.