CP40 service manual - 第114页
3. X-Y PART (CP-40) 3-3-1. Mover Camera Replacement Method from SFA- 410ED C AMERA to XC-ST50CAMERA 1. Application Time 2. Changed Items Classification Before After Equipment Material No. :J9059083A N o m e n c l a t u r…
3. X-Y PART
(CP-40)
NO Symptom Possible Cause Error Code Action
Instructio
n
1
X-Y Axis Malfunction
Position of Move Camera is not Proper.
1)Reset Move Camera Offset. 3-3-1
2 2)Re-Setup & Calibration 3-3-1
3 Bad Contact of Connector 3)Replace Bolt for Securing Connector.
4 Bad Ball Screw 4)Replace Ball Screw.
5 Loose X-Axis Motor Tension 5)Adjust X-Axis Motor Tension. 3-3-3
6
Malfunction Caused by Linear Scale
Foreign Materials
6)Clean Linear Scale.
7 X-Axis S/W Limit Sensing 7)Reset X-Axis S/W Limit Sensor
8 24V DC Power is not Supplied. 8)Replace Power Supply(for 24V DC).
9
10
11
Bad X-Y Axis Motor
Bad Contact of Motor Connector Cable 1)Reconnect CN1 Connector Pin.
12 Home Sensor Malfunction 2)Reconnect Home Sensor Connector.
13 Power is nor Supplied. 3)Reconnect Power Supply Cable.
14
Bad X-Axis Home
X-Axis Limit Sensor Malfunction 1)Replace X-Axis Limit Sensor.
15 Abnormal Symptom of Motor Parameter
2)Modify X-Axis Motor Driver Parameter
Data.
16 Abnormal Symptom of Servo Driver 3)Replace X-Axis Servo Motor Driver.
17
3-2. Trouble Diagnosis
3. X-Y PART
(CP-40)
3-3-1. Mover Camera
Replacement Method from SFA-410ED CAMERA to XC-ST50CAMERA
1. Application Time
2. Changed Items
Classification Before After
Equipment
Material No. :J9059083A
Nomenclature :NEW FIDUCIAL CAMERA BARREL
Material No. :J9059083B
Nomenclature :NEW FIDUCIAL CAMERA BARREL
Control
CAMERA -SAMSUNG
Material No. :J1300491
Standard :SFA-410ED
CAMERA -SONY
Material No. :J6751013A
Nomenclature :XC-ST50
S/W None Not Changed
Specification - Material No. : J9059083A,J1300491 - Material No. :
J9059083B,J6751013A
Classification Application Date Model Name Serial No. Remarks
Equipment After March, 2003
CP-20
CP-40
CP-45
After No.157
After No.1197
After No.1122
May
March
April
Version Date WA QA CA Note
00 Nov04 O O O
3. X-Y PART
(CP-40)
3. Preparation
4.
Move Camera Replacement
4-1. Prepare Required Materials.
Classification Material No. Nomenclature Qty. Remarks
1 J6751013A CCD CAMERA[XC-ST50] 1EA Changed
2 J9059083A NEW FIDUCIAL CAMERA BARREL ASS'Y 1EA Changed
3 J6304008A O-RING [G25] 2EA
4 J7255027A CAMERA ISOLATOR2 [J7255027A] 1EA
5 J9060102B NEW FIDUCIAL OUTER LED BOARD ASS'Y 1EA
6 J7155259A FIDUCIAL CAMERA BRACKET [A6061-T6] 1EA
Preparation
Material
Prepare Required Materials in the below Procedures.
S/W
Tool
Wrench set, Calibration Fixture
Version Date WA QA CA Note
00 Nov04 O O O