CP40 service manual - 第142页
4. Feeder Base & ANC (CP-40) 3. Using Driver and Hammer, Remove Hole Plug. (8ea for Front, 8ea for Rear) 4. Loosen Two M3*6 T oras Bo lts on Left- and Right-hand Sides to Remove Chip Cover. Hammer Driver J6309009A Ho…
4. Feeder Base & ANC
(CP-40)
4-3-5. Multi Cylinder Block Replacement
1
2
Toras
M4*8 4EA
J2101539 Cover-Feeder S/T(Front)
J2101864 Cover-Feeder S/T(Rear)
J7061004B CON PANEL F/R
1. Loosen Four M4*8 Toras Bolts to Disconnect Cover-Feeder
S/T from the Body.
2. Loosen Four M3*6 Toras Bolts to Disconnect Con Panel F/R
from the Body.
Toras
M3*6 4EA
Version Date WA QA CA Note
00 Nov04 O O O
4. Feeder Base & ANC
(CP-40)
3. Using Driver and Hammer, Remove Hole Plug.
(8ea for Front, 8ea for Rear)
4. Loosen Two M3*6 Toras Bolts on Left- and Right-hand
Sides to Remove Chip Cover.
Hammer
Driver
J6309009A
Hole Plug
Feeder Base
3
4
* Longer than Left Bracket
J2101456
Cover-Front-Left
J2101459
Cover-Rear-Left
J2101457
Cover-Front-Right
J2101458
Cover-Rear-Right
Toras M3*6
Version Date WA QA CA Note
00 Nov04 O O O
4. Feeder Base & ANC
(CP-40)
5. Using L-Wrench and Driver Handle, Loosen Eight M8*25 Hexagon
Wrench Bolts.
(T-Wrench(6mm) can also be Used)
6. Lift and Remove Feeder Base with Both Hands.
(Caution) Care should be Taken not to Get Injured in the Waist.
5
Driver Handle
L-Wrench(6mm)
Hexagon Wrench Bolt
M8*25 8ea
Version Date WA QA CA Note
00 Nov04 O O O