00193756-03 - 第19页
Retrofit instructions Nozzle changer SIPLACE H F-series C&P head 12/2004 Edition 19 2.4 Conversi on : Switch t he placem ent mac hine off at the m ain switc h. : Knock the pin s into the appropria te hole s in th e n…
Retrofit instructions Nozzle changer SIPLACE HF-series C&P head
18
2.3 Safety instructions
WARNING
Comply with the higher ranking "Safety Instructions" in Chapter "Operational Safety" in the User
Manual and Service Manual
The placement machines SIPLACE are powered by mains voltage.
Portions of the system are therefore conducting dangerous electricity, inside the machine even
while the master switch is turned off.
Death, serious injury or considerable damage may result if these automatic placement systems
are handled incorrectly.
After you have properly carried out the shut-down of the operating system:
Before all work the machine must be turned off at the main switch and isolated from the mains. In
addition, the compressed air supply must be turned off at the main valve of the compressed air
unit in the machine base and the compressed air lines must be bled by actuating the needle valve
at the compressed air unit.
Danger: For anyone wearing a heart pacemaker it is not permitted to work near linear motors, as
described in detail in the User Manual and the Service Manual, Chapter "Special Safety Instruc-
tions when working in vivinty of powerful magnetic fields" .
Obey the applicable accident prevention regulations, DIN standards and special safety codes of
your country at all times. DIN EN 60204 must be adhered to during all work inside the machine
base.
Follow the instructions regarding residual voltages in Chapter "Operational Safety".
Comply with regulations on ESDs (see Chapter "Operational Safety").
During the work of retrofitting secure the machine conscientiously against other personnel and
prevent it from being turned back on without authorization, as described in the User Manual in the
chapter "Locking the Machine...".
There is additional, higher risk of accident when working with the SITEST program.
The SITEST program is only to be started by personnel who are authorized to do so. 2
2
2.3.1 Definitions
2
Please note 2
Retrofit instructions Nozzle changer SIPLACE HF-series C&P head
12/2004 Edition
19
2.4 Conversion
: Switch the placement machine off at the main switch.
: Knock the pins into the appropriate holes in the nozzle reject bracket.
2
2
2
2
2
2
2
2
2
2
2
2
2
Retrofit instructions Nozzle changer SIPLACE HF-series C&P head
20
: Fit the nozzle take-off device.
: Install the reject bin sensor from the component reject bin parking position on the nozzle reject
carrier.
: Insert the reject bin.
2
2
: Plug the cable and the compressed air hose into the C&P head nozzle changer.
The cable for row 1 is marked "a".
2
Reject bin sensor
Nozzle take-off
device
Reject
bin
Cable
Compressed air
connector