Specification SIPLACE X-Series规格说明书2 - 第27页

27 Component Feeding SIPLACE X Component Changeover Table Technical Data Length x width 752 x 592 mm² Height for 830 mm PCB transport height 900 mm PCB transport height 930 mm PCB transport height 950 mm PCB transport he…

Component Feeding

SIPLACE X Component Changeover Table

The SIPLACE X component

changeover tables are stand-

alone and easily maneuver-

able modules that are moved

into the machine with the

automatic docking unit. This

ensures that the table is

accurately positioned in the

placement machine. Reels

are kept in the tape container

on the component change-

over table. A cutting device

on the machine automatically

cuts the used tape. The com-

ponent changeover tables

can be set up directly on the

machine or in an external

set-up area with feeder mod-

ules. The benefits of offline

set-up are that the set-ups

can be prepared without

stopping the line. This allows

the set-up to be changed

very quickly using the

changeover table principle.

The SIPLACE X component

changeover table also sup-

port extremely high-speed

attachment and removal of

the feeder modules while the

placement process is run-

ning. The component feed-

ers are at rest during the

placement process - allowing

tapes to be spliced without

stopping the machine.

If an optional component bar-

code reader and the Setup

Center option are installed, it

is possible to read and check

the barcodes on the tape

reels. This makes sure that

the component is allocated to

the right lane, and the PCB

placement can be traced

using <NoHyphen/>trace-

ability software.

Dummy feeder modules are

used at unassigned locations

to protect the operators.

SIPLACE X component

changeover table

Tape container Waste container for remaining

empty tape

Component

feeder table

Component Feeding

SIPLACE X Component Changeover Table

Technical Data

Length x width

752 x 592 mm²

Height for

830 mm PCB transport height

900 mm PCB transport height

930 mm PCB transport height

950 mm PCB transport height

820 mm

890 mm

920 mm

940 mm

Weight

without feeder modules

with feeder module at all locations

80.4 kg

139.6 kg

Tape reel diameter

standard

maximum

up to 432 mm (17“)

483 mm (19“)

Locations for feeder modules max. 40 (8 mm X)

Changeover time for the component

changeover table

< 1 minute

Component feeding

(SIPLACE X component changeover table)

4 component changeover tables with tape reel

holders and integral waste containers

40 x 8 mm feeder module locations per

component changeover table

Matrix tray changer in place of component change-

over tables at locations 2 and 4

Feeder module types (SIPLACE X) Component tapes, waffle-pack trays, stick maga-

zines and label feeders with adapter, reject con-

veyors

Feeding capacity

(SIPLACE X component changeover table)

160 8 mm X tape feeder modules (X4I: 148)

80 2x8 mm X tape feeder modules (X4I: 74)

80 12 mm X tape feeder modules (X4I: 74)

52 16 mm X tape feeder modules (X4I: 48)

52 24 mm X tape feeder modules (X4I: 48)

40 32 mm X tape feeder modules (X4I: 36)

32 44 mm X tape feeder modules (X4I: 28)

24 56 mm X tape feeder modules (X4I: 22)

20 72 mm X tape feeder modules (X4I: –)

16 88 mm X tape feeder modules (X4I: –)

Component Feeding

SIPLACE X Tape Feeder Modules

SIPLACE X tape feeder

modules are intelligent tape

feeder modules for flexible

production environments.

They greatly simplify set-up

and conversion tasks. All

SIPLACE X feeder modules

support tape splicing as stan-

dard, which prevents

machine stoppages when

refilling.

The benefits at a glance:

Conversion-friendly

• All SIPLACE X tape feeder

modules are designed as

single-lane feeder mod-

ules. This minimizes any

restrictions during conver-

sion.

• Conversion is fast and

straightforward, and can

even be done during a

production run.

• Omega profiles on both

the tape feeder module

and the table allow the

tape feeder modules to be

attached and removed

while production is run-

ning.

Operator-friendly

• Contactless data and

power transmission make

it easier to attach/remove

the tape feeder modules.

• Menu-driven LCD display

supports the operator with

the latest information.

• A multicolor status display

signals the operating sta-

tuses of the X tape feeder

module:

- Green: “Standby/Set-up

in progress”

- Orange: “Component

running out”

- Red: “Fault”

- LED off: “Tape feeder

module is not in current

set-up and may be

removed”

Robust

• Brushless motors extend

the service life of the X

tape feeder modules.

Intelligent

• A unique tape feeder mod-

ule ID ensures that the

component is assigned

exactly to the tape feeder

module. This makes reli-

able set-up verification

very simple.

• Component pitch, feeding

speed and other functions

are set automatically

when you download the

set-up program.

High feeding accuracy

• Closed-loop control dis-

tance measurement guar-

antees highly accurate

component feeding, even

with 01005 components.

Technical data

Tape feeder

module

L x H

[mm²]

Width

[mm]

Loca-

tion

Transport

increment

[mm]

Max. tape

height

[mm]

8 mm X

a,b

587x200 10.8 1 1/2/4/8 3,5

2x8 mm X 587x200 22.9 2 1/2/4/8 3,5

12 mm X

587x200 22.6 2 4 - 16

6,5

16 mm X

587x200 34.4 3 4 - 20

24 mm X

587x200 34.4 3 4 - 32

32 mm X

587x200 46.2 4 4 - 40

44 mm X

587x200 58.0 5 4 - 52

56 mm X

587x200 69.8 6 4 - 64

72 mm X

587x200 81.6 7 4 - 80

88 mm X

587x200 105.2 9 4 - 96

104 mm X

587x200 128.8 10 4 - 96

Tape reels Ø

178 to 483 mm (7“ - 19“), changeover time 8 s

a) PSA Kit available as an option.

b) 01005-compliant.

c) In 4mm increments.

d) PSA Kit, standard.