E114260-electrical-tester-uk
europlacer.com 2 FEA TURES Europlacer’s agship placement platforms can test the electrical characteristics and polarity of components using an LCR Electrical Test bridge. The tester is standard on iineo+ and xpii+ machi…
europlacer.com
2
FEATURES
Europlacer’s agship placement platforms can test the
electrical characteristics and polarity of components using an
LCR Electrical Test bridge. The tester is standard on iineo+ and
xpii+ machines and an option on atom machines.
The integrated component tester is a critical resource for
customers working in high integrity sectors such as automotive,
defence, medical and avionics. The test function prevents
human error by verifying correct feeder loading. More than a
simple test for presence, the tester measures electrical values
using an LCR bridge. This ensures that incorrect value, out-
of-specication or damaged components will not be placed
during production. Crucially, the tester can be independently
calibrated against all international standards & institutes. It
guarantees you and your customer the statutory performance
required when working on demanding applications.
Each electrical test is made using Europlacer’s precise
positioning technology to place the component accurately on
the integrated test pad.
This precision permits the testing of devices with very small
dimensions, including 01005 packages.
The test pad is mounted securely inside the placement machine
and does not compromise other platform resources. The test
is performed during the placement process: after picking the
component from the reel and before placing it on the board.
Incorrect components are automatically rejected. Compared
to other test solutions, Europlacer’s test pad method delivers
better throughput and more accurate measurements of
component value.
The tester can measure the characteristics of passive
components (resistors, capacitors and inductors) and verify
the polarity of diodes. Combined with Europlacer’s RC5.16
operating software, the test process will allow you to measure
the characteristics of any type of diode with voltages up to 40V.
When paired with Europlacer’s traceability option, users can
record data on all passed tests and component rejections (e.g.
measured values, intended values, etc.), providing condence
that the test and placement process was completed within the
required design and production limits.
TECHNICAL DATA
• Component dimension range from 01005 to
8mmx12mm
• Resistors: from 0 to 4M Ω
• Capacitors: from 1pF to 300µF
• Inductors : from 2µH to 100H
• Diodes: Up to 40V
TECHNICAL INFORMATION
The tester is split into two zones for the two applications.
One zone is dedicated to the characteristics of passive
components. The other zone integrates a voltmeter
function to measure voltage and the full characteristics
of all kind of diodes (Zener breakdown voltage, threshold
voltage for regular and Schottky diodes, polarity, etc.).
KEY BENEFITS
• Guarantees a good process
• Protects against human error
• Wide range of test capabilities: resistors,
capacitors, inductors and diodes up to 40V
• Higher throughput compared to other systems
• Ability to test small sized packages (down to
01005 dimensions)
• Links with Traceability technology to log all test
data for analysis
A built-in current generator applies a calibrated current of
5mA – an eective and totally safe level that safeguards
the electrical integrity of components. The voltmeter uses
a static relay to ensure a long operational life.
• Available on: all machines
• Installation: At Europlacer factory - On customer’s site
• Comments: Upgrade kits available for existing electrical testers without Voltmeter.
PRODUCT INFORMATION
ELECTRICAL TESTER