00198377-01_SM_JTF-ML2_en - 第103页
4 Conveyor Mechanics 4.7 Replacing the Pusher Unit and Parts Service Manual SIPLACE JTF-ML2 08/2017 103 ► Remove the two screws ISO 4762 - M 3 x 6- A2-70 [03042541-xx] (1) . ► Remove the Pusher guide [03145802-xx]. ► Rem…
4 Conveyor Mechanics
4.7 Replacing the Pusher Unit and Parts
102 Service Manual SIPLACE JTF-ML2 08/2017
4.7.3 Replacing the Pusher Motor
Parts, Equipment and Tools
●
Standard tools
●
Motor with pulley for pusher [03147371-xx]
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation. Observe the instructions in section 1.2 "Preparatory Work..." [}11].
► Follow the removal instructions for 2.1.1 "Removing Conveyor from Machine" [}17]
► Follow the removal instructions for replacing the Pusher unit cpl. [03147372-xx].
► Remove the screw ISO 4762 - M 3 x 6-A2-70
[03042541-xx](1).
► Remove the Pusher vertical guide rail cpl.
[03147453-xx].
► Remove the two screws DIN EN ISO 7380-M3 x
5-A2-70 [03045193-xx] (1),
4 Conveyor Mechanics
4.7 Replacing the Pusher Unit and Parts
Service Manual SIPLACE JTF-ML2 08/2017 103
► Remove the two screws ISO 4762 - M 3 x 6-
A2-70 [03042541-xx] (1).
► Remove the Pusher guide [03145802-xx].
► Remove the screw ISO 4762 - M 3 x 6-A2-70
[03042541-xx] (1).
► Remove the Belt presser [03146231-xx] (2)
4 Conveyor Mechanics
4.7 Replacing the Pusher Unit and Parts
104 Service Manual SIPLACE JTF-ML2 08/2017
► Loosen the two screws ISO 4762 - M 3 x 6-A2-70
[03042541-xx] (1) on the Pusher 22 motor mount-
ing [03147369-xx] to release tension on the
Toothed belt Synchroflex 6+-0.1 S3M/459
[03146204-xx].
► Remove the two screws ISO 4762 - M 3 x 6-
A2-70 [03042541-xx] (1).
► Remove the Motor w/ pulley f. pusher [03147371-
xx].
Installation
► Follow the removal instructions in reverse order for installation.
NOTICE
Motor shaft
Take care to align the flat side of the motor shaft to be perpendicular to the insertion direc-
tion of the set screw during assembly.