00198377-01_SM_JTF-ML2_en - 第143页
6 Magazine 6.2 Locking and Unlocking the Direction Lock of 9-Level Cassettes Service Manual SIPLACE JTF-ML2 08/2017 143 6.2 Locking and Unlocking the Direction Lock of 9-Level Cassettes Unlocking the Direction Lock To un…
6 Magazine
6.1 Pushing Trays into and Removing from the Cassette
142 Service Manual SIPLACE JTF-ML2 08/2017
6.1 Pushing Trays into and Removing from the Cassette
Pushing Trays into the Cassette
Fig.28: Loading cassette
1. Cassette
2. Spring on the cassette
The spring must point to the right.
3. Tray
4. Orientation of the tray
The side with the long recess is pushed into the
cassette first.
► Place the cassette down on a stable surface.
► Observe the orientation. The spring (2) must
point to the right.
► Observe the direction of loading(3) for the
trays(4).
► Push the trays into the cassette.
Fig.29: Transportation Lock
► Secure the waffle pack trays with the transporta-
tion locks on both sides.
► Ensure the direction lock is active.
► On the host system, link the components / tray code to the slot number of the cassette.
Removing the trays from the cassette
► Place the cassette down on a stabile surface.
► Unlock the transportation locks.
► Pull the trays out of the slots.
6 Magazine
6.2 Locking and Unlocking the Direction Lock of 9-Level Cassettes
Service Manual SIPLACE JTF-ML2 08/2017 143
6.2 Locking and Unlocking the Direction Lock of 9-Level
Cassettes
Unlocking the Direction Lock
To unlock the direction lock proceed as follows:
► Unlock the lever (1).
► Move the direction lock outwards (2) (position
"open").
► Lock the lever (3).
Lock the Direction Lock
To lock the direction lock proceed as follows:
► Unlock the lever (1).
► Move the direction lock inwards (2) (position
"close").
► Lock the lever (3).
6 Magazine
6.3 Remove the Cassette from the SIPLACE JTF-ML2
144 Service Manual SIPLACE JTF-ML2 08/2017
6.3 Remove the Cassette from the SIPLACE JTF-ML2
Fig.30: Menu Locations
► Click the button to open the Setup Loca-
tions menu.
► Click the button to display the setup of
the table.
Fig.31: Menu Locations - Table
► Mark the JTF area .
► Click the Settings... button.
Fig.32: Move the Cassette into the Refill Position
► Move the cassette into the refill position. Click the
Refill position button and the Move to refill
position ... for the relevant cassette.