00198377-01_SM_JTF-ML2_en - 第28页
2 General Tasks 2.1 Hardware Tasks 28 Service Manual SIPLACE JTF-ML2 08/2017 Fig.10: Holding the tower ► Hold the SIPLACE JTF‑ML2 with one hand on the bottom handle and one hand on top of the tower. Fig.11: Hooking in …
2 General Tasks
2.1 Hardware Tasks
Service Manual SIPLACE JTF-ML2 08/2017 27
2.1.4 Removing Side Cover
Parts, Equipment and Tools
●
Standard tools
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation. Observe the instructions in section 1.2 "Preparatory Work..." [}11].
► Remove the tower from the machine (See 2.1.2 "Removing Tower from Machine" [}21])
► Remove the four screws ISO 7380-2 M 4 x 6-
A2-70 [03099577-xx] (1).
► Remove Tower side Cover [03129023-xx] (1).
Installation
► Follow the removal instructions in reverse order for installation.
2.1.5 Mounting the Tower
Pulling out the Hooks
► Pull out both hooks(1) at the SIPLACE JTF‑ML2
adapter.
2 General Tasks
2.1 Hardware Tasks
28 Service Manual SIPLACE JTF-ML2 08/2017
Fig.10: Holding the tower
► Hold the SIPLACE JTF‑ML2 with one hand on
the bottom handle and one hand on top of the
tower.
Fig.11: Hooking in the tower
► Hook in the tower at the SIPLACE JTF‑ML2 ad-
apter.
The bolts(1) have to be at the hooks(2).
► Push the tower parallel in the machine.
2 General Tasks
2.1 Hardware Tasks
Service Manual SIPLACE JTF-ML2 08/2017 29
► Move the tower a bit while mounting the screws
to reduce pressure on the screws.
Fig.12: Tighten the tower
► Fasten the tower with two screws(1) ISO7379 -
10x25-12.9 on the SIPLACE JTF‑ML2 adapter.
2.1.6 Mounting the Conveyor
Parts, Equipment and Tools
●
Standard tools
Installation
Fig.13: Mounting the Transport 1
► Remove the screws(1) and remove the
cover(2).