00198377-01_SM_JTF-ML2_en - 第81页
4 Conveyor Mechanics 4.2 Removing the Conveyor Driver Unit and its Parts as Preparatory Steps Service Manual SIPLACE JTF-ML2 08/2017 81 Installation ► Follow the removal instructions in reverse order for installation. Al…
4 Conveyor Mechanics
4.2 Removing the Conveyor Driver Unit and its Parts as Preparatory Steps
80 Service Manual SIPLACE JTF-ML2 08/2017
► Remove the screw DIN EN ISO 4026 - M3 x 4-
A2-21H [03025540-xx] (1) from the Conveyor
drive pulley S2MZ26 [03127981-xx] (2).
► Remove the Conveyor drive pulley with set screw
[03156654-xx].
► Remove the three screws ISO 4762 - M 3 x 6-
A2-70 [03042541-xx] (1) from the Motor Assem-
bly, BLDCmotor w/ encoder, Gearbox [03146371-
xx].
► Remove the motor Assembly, BLDCmotor w/ en-
coder,gearbox [03146371-xx].
4 Conveyor Mechanics
4.2 Removing the Conveyor Driver Unit and its Parts as Preparatory Steps
Service Manual SIPLACE JTF-ML2 08/2017 81
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following in-
structions:
► Please consider the correct angle of the cable (2)
during reassembling as well as the correct screw
holes(1).
► Take care when assembling the set screw to align the flat side of the shaft to the direction
where the set screw is coming in.
4 Conveyor Mechanics
4.3 Replacing the Conveyor Roller Assembly
82 Service Manual SIPLACE JTF-ML2 08/2017
4.3 Replacing the Conveyor Roller Assembly
Parts, Equipment and Tools
●
Standard tools
●
Belt tension measuring device [00326015‑xx]
●
Conveyor roller assembly [03129007-xx]
Removal
There are two ways to get to the Conveyor roller assembly [03129007-xx] depending on the side of
the conveyor. The final steps work for both sides accordingly.
► Remove the conveyor (See Removing SIPLACE JTF-ML2 Conveyor from Machine).
► Follow the instructions to remove the belt from here 4.2 "Removing the Conveyor Driver Unit
and its Parts as Preparatory Steps" [}72].
► Remove the two screws ISO 4762 - M 4 x 8-
A2-70 [03042551-xx] (1).
► Remove the Conveyor motor heat transfer block
A [03148017-xx] (1).