00198377-01_SM_JTF-ML2_en - 第82页
4 Conveyor Mechanics 4.3 Replacing the Conveyor Roller Assembly 82 Service Manual SIPLACE JTF-ML2 08/2017 4.3 Replacing the Conveyor Roller Assembly Parts, Equipment and Tools ● Standard tools ● Belt tension measuring de…
4 Conveyor Mechanics
4.2 Removing the Conveyor Driver Unit and its Parts as Preparatory Steps
Service Manual SIPLACE JTF-ML2 08/2017 81
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following in-
structions:
► Please consider the correct angle of the cable (2)
during reassembling as well as the correct screw
holes(1).
► Take care when assembling the set screw to align the flat side of the shaft to the direction
where the set screw is coming in.
4 Conveyor Mechanics
4.3 Replacing the Conveyor Roller Assembly
82 Service Manual SIPLACE JTF-ML2 08/2017
4.3 Replacing the Conveyor Roller Assembly
Parts, Equipment and Tools
●
Standard tools
●
Belt tension measuring device [00326015‑xx]
●
Conveyor roller assembly [03129007-xx]
Removal
There are two ways to get to the Conveyor roller assembly [03129007-xx] depending on the side of
the conveyor. The final steps work for both sides accordingly.
► Remove the conveyor (See Removing SIPLACE JTF-ML2 Conveyor from Machine).
► Follow the instructions to remove the belt from here 4.2 "Removing the Conveyor Driver Unit
and its Parts as Preparatory Steps" [}72].
► Remove the two screws ISO 4762 - M 4 x 8-
A2-70 [03042551-xx] (1).
► Remove the Conveyor motor heat transfer block
A [03148017-xx] (1).
4 Conveyor Mechanics
4.3 Replacing the Conveyor Roller Assembly
Service Manual SIPLACE JTF-ML2 08/2017 83
► Remove the two screws ISO 10642 - M3x6-
A2-70 [03082814-xx] (1).
► Remove the Conveyor top cover [03147570-xx]
(2).
► Remove the two screws ISO 10642 - M3x6-
A2-70 [03082814-xx] (4).
► Remove the Stopper plate [03132873-xx] (3).
► Loosen the tension pulley (2).
► Carefully remove the Toothed belt 10+-0.1
S2M/726 [03130743-xx] (1).
► Remove the screw ISO 4762 - M 3 x 6-A2-70
[03042541-xx] (1) while holding the conveyor
shaft (3) with a open ended wrench.
► Remove the Driving pulley S2MZ26 [03128931-
xx] (2).
Driving pulley S2MZ26 [03128931-xx]
Or: