00198377-01_SM_JTF-ML2_en - 第98页
4 Conveyor Mechanics 4.7 Replacing the Pusher Unit and Parts 98 Service Manual SIPLACE JTF-ML2 08/2017 ► Remove the two screws DIN EN ISO 7380-M3 x 5-A2-70 [03045193-xx] (1) . ► Remove the two screws ISO 4762 - M 3 x 6- …
4 Conveyor Mechanics
4.7 Replacing the Pusher Unit and Parts
Service Manual SIPLACE JTF-ML2 08/2017 97
Installation
► Follow the removal instructions in reverse order for installation.
► Check the two dowels (1) before assembling
back.
4.7.1 Replacing the Toothed Belt Synchroflex
Parts, Equipment and Tools
●
Standard tools
●
Toothed belt synchroflex 6+-0.1 S3M/459 [03146204-xx]
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation. Observe the instructions in section 1.2 "Preparatory Work..." [}11].
► Remove the conveyor (see 2.1.1 "Removing Conveyor from Machine" [}17]).
► Remove Pusher unit cpl. as in Chapter Replacing the Pusher unit cpl.
► Remove the screw ISO 4762 - M 3 x 6-A2-70
[03042541-xx] (1).
► Remove the Pusher vertical guide rail cpl.
[03147453-xx] (2).
Pusher vertical guide rail cpl. [03147453-xx]
4 Conveyor Mechanics
4.7 Replacing the Pusher Unit and Parts
98 Service Manual SIPLACE JTF-ML2 08/2017
► Remove the two screws DIN EN ISO 7380-M3 x
5-A2-70 [03045193-xx] (1).
► Remove the two screws ISO 4762 - M 3 x 6-
A2-70 [03042541-xx] (1).
► Remove the Pusher guide [03145802-xx] (1).
► Remove the screw ISO 4762 - M 3 x 6-A2-70
[03042541-xx] (1).
► Remove the Belt presser [03146231-xx] (2).
4 Conveyor Mechanics
4.7 Replacing the Pusher Unit and Parts
Service Manual SIPLACE JTF-ML2 08/2017 99
Belt presser [03146231-xx] removed.
► Loosen the two screws ISO 4762 - M 3 x 6-A2-70
[03042541-xx] (1) on the Pusher 22 motor mount-
ing [03147369-xx] to release tension on the
Toothed belt Synchroflex 6+-0.1 S3M/459
[03146204-xx].