00198268-02_GS_SIPLACE-Pro-14.1-R17-1_EN - 第45页
Getting S tarted SIPLACE Pro 14.1 (R17-1) 3 T utorial 05/2017 Edition 3.7 Exercise 6: Optimizing the Job 45 3.7 Exercise 6: Optimizing the Job 3.7.1 Configuring the Op timization Parameters Aim of exercise 3 The requirem…
3 Tutorial Getting Started SIPLACE Pro 14.1 (R17-1)
3.6 Exercise 5: Creating a Job with Initial Setup 05/2017 Edition
44
Result 3
The job will be shown in the Job Editor. 3
3
Fig. 3 - 10 Result: "Job with Initial Setup and Recipe List" screen
– This job can now be optimized. An optimized setup will be generated, which can then be used
for a Download. Continue with Exercise 6: Optimizing the Job.
Getting Started SIPLACE Pro 14.1 (R17-1) 3 Tutorial
05/2017 Edition 3.7 Exercise 6: Optimizing the Job
45
3.7 Exercise 6: Optimizing the Job
3.7.1 Configuring the Optimization Parameters
Aim of exercise 3
The requirements defined in job configuration depend upon the complexity of the job. Get to know
this function here and learn how to define a simple configuration. 3
How to configure a job 3
Open the Job1_Lesson5 job at My Jobs\Getting Started.
Switch to the Job tab and select the Configure... button in the Optimization edit field.
–The SIPLACE - Optimization Parameters dialog box will open.
Select the parameter groups "Limit Runtime" and "Optimizer Level" and enter the following val-
ues:
- Runtime: 1 minute
- Optimizer Level: 3
3
Fig. 3 - 11 Result: "Optimization Parameters" screen
3 Tutorial Getting Started SIPLACE Pro 14.1 (R17-1)
3.7 Exercise 6: Optimizing the Job 05/2017 Edition
46
. 3
Fig. 3 - 12 Result: "Optimization Parameters" screen
Confirm with OK.
3.7.2 Performing Optimization
Aim of exercise 3
The job will be optimized and an optimized setup (result setup) generated. Notification messages
will be issued to inform you whether the optimization was successful. You will learn to localize and
remedy errors. The result setups can be viewed and printed out as reports. 3
How to optimize a job and display the errors 3
Switch to the Job tab and select the Optimize... button in the Optimization edit field.
The Optimization Status dialog box will open and optimization will start.
Follow the instructions in this dialog box. Optimization was not successful as errors occurred.
Select the Errors button in the Optimization edit field.
The Error Dialog will open. Localize and remedy the problem.