IPC 7711A - 第53页
OUTLINE This procedure covers baking and preheating of printed boards and printed board assemblies to prepare the product for the subsequent operations. Included are steps for: A. Baking Baking is used to eliminate absor…
NOTES
IPC-7711A/7721A
Number: 2.4.2
Revision:
Date: 2/98
Subject: Coating Replacement, Conformal Coatings/Encapsulants
Page2of2
Copyright Association Connecting Electronics Industries
Provided by IHS under license with IPC
Not for Resale
No reproduction or networking permitted without license from IHS
--``,``,-`-`,,`,,`,`,,`---
OUTLINE
This procedure covers baking and preheating of printed boards and printed board
assemblies to prepare the product for the subsequent operations. Included are steps
for:
A. Baking
Baking is used to eliminate absorbed moisture. Whenever possible printed wir-
ing boards and printed wiring board assemblies should be baked prior to solder-
ing, unsoldering and coating operation to prevent blistering, measling or other
laminate degradation.
B. Preheating
Preheating is used to promote the adhesion of subsequent materials to the
board surfaces and to raise the temperature of the printed wiring board to allow
soldering and unsoldering operations to be completed more quickly.
CAUTION
Baking and preheating procedures must be carefully selected to ensure that tem-
perature and time cycles used do not degrade the product. Environmental conditions
must also be carefully considered to ensure that vapors, gases, etc., generated dur-
ing the heating process do not contaminate the product’s surfaces.
CAUTION
To prevent fluxes or other contaminates from being baked onto the board surface,
thoroughly clean the board or assembly prior to baking or preheating.
REFERENCES
2.1 Handling Electronic Assemblies
2.2 Cleaning
TOOLS & MATERIALS
Cleaner
Cleaning Wipes
Oven
EVALUATION
7711A/7721A
General
Information and
Common Procedures
Revision:
Date: 2/98
Baking and Preheating
Number: 2.5
Product Class: R, F, W, C
Skill Level: Intermediate
Level of Conformance: High
Material in this manual was voluntarily established by Technical Committees of IPC. This material is advisory only and its use
or adaptation is entirely voluntary. IPC disclaims all liability of any kind as to the use, application, or adaptation of this material.
Users are also wholly responsible for protecting themselves against all claims or liabilities for patent infringement. Equipment
referenced is for the convenience of the user and does not imply endorsement by IPC.
Page1of2
Copyright Association Connecting Electronics Industries
Provided by IHS under license with IPC
Not for Resale
No reproduction or networking permitted without license from IHS
--``,``,-`-`,,`,,`,`,,`---
NOTES
IPC-7711A/7721A
Number: 2.5
Revision:
Date: 2/98
Subject: Baking and Preheating
Page2of2
Copyright Association Connecting Electronics Industries
Provided by IHS under license with IPC
Not for Resale
No reproduction or networking permitted without license from IHS
--``,``,-`-`,,`,,`,`,,`---