Instrucciones de uso_HF3_14_es - 第317页
Inline interface outfeed SMEMA ü Para abrir la ventana de diálogo de las configuraciones [Inline interface outfeed SMEMA]: 1. Abra la ventana de introducción [Conveyor] 2. En el recuadro [Conveyor 1] haga clic en el botó…
2. Clique en para cerrar el cuadro de diálogo.
Descripción de funciones | 6
Ersa GmbH Instrucciones de uso_HF3_14_es | 30/10/2014 316 / 0
Inline interface outfeed SMEMA
ü Para abrir la ventana de diálogo de las configuraciones [Inline interface outfeed
SMEMA]:
1. Abra la ventana de introducción [Conveyor]
2. En el recuadro [Conveyor 1] haga clic en el botón .
ð Se abre la ventana de las configuraciones:
Inline interface outfeed SMEMA Conveyor 1 Settings
Maintenance mode
Signals of inline interface SMEMA
Inside machine
ISAL sensor
Sensor ISAL hardware signal
Sensor ISAL software signal
Number of boards
Hardware signals: Send from conveyor
'Board available' send to N+1
Conveyor 1
Conveyor active
Active
Interface configured
Interface active
ignore N + 1
Hardware signals: Send to conveyor
'Not busy' received from N+1
'Fault cascade error free' received from N+1
Signal delay
Signal delay of release from N + 1
s
Error inline interface in outfeed
Error active
Monitoring time for error active
Time till error INLINE exit
Congestion monitoring with inline interface signal "Error n+1"
Create warning on congestion
Create alarm on congestion
Time until creation of warning
Time until creation of alarm
Time actual value
Abb. 119: Ventana de diálogo de las configuraciones [Inline interface outfeed SMEMA]
Estado de la señal de las Inline interface en el recuadro [Signals of inline
interface SMEMA]
En el recuadro [Inside machine]:
▪ ISAL sensor [Sensor ISAL hardware signal]
▪ ISAL sensor [Sensor ISAL software signal]
▪ ISAL sensor [Number of boards]
▪ Hardware signals: Send from conveyor ['Board available' send to N+1]
En el recuadro [Active]:
▪ [Interface configured]
▪ [Interface active]
▪ [ignore N + 1]
Descripción de funciones | 6
Ersa GmbH Instrucciones de uso_HF3_14_es | 30/10/2014 317 / 0
En el recuadro [Hardware signals: Send to conveyor]:
▪ ['Not busy' received from N+1]
▪ ['Fault cascade error free' received from N+1]
Estado del transportador en el recuadro [Conveyor 1]
▪ [Conveyor active]
Recuadro [Signal delay]
▪ [Signal delay of release from N + 1]
Recuadro [Error inline interface in outfeed]
▪ [Time till error INLINE exit]
▪ [Error active]
▪ [Monitoring time for error active]
▪ [Time actual value]
Recuadro [Congestion monitoring with inline interface signal "Error n+1"]
▪ [Create warning on congestion]
▪ [Time until creation of warning]
▪ [Create alarm on congestion]
▪ [Time until creation of alarm]
Observe la figura siguiente:
Dispositivo
de soldadura
Dispositivo
anterior
Siguiente
dispositivo
Interfaz
SMEMA / WMW
n + 1n - 1 n
Abb. 120: Representación esquemática de las instalaciones y de las interfaces
ü Aceptar la configuración, cerrar el diálogo
1. Para aceptar la configuración clique el botón .
2. Clique en para cerrar el cuadro de diálogo.
Error inline interface in outfeed
Time till error INLINE exit
Error active
Monitoring time for error active
Congestion monitoring with inline interface signal "Error n+1"
Create warning on congestion
Time until creation of warning
Create alarm on congestion
Time until creation of alarm
Time actual value
s
s
s
s
Descripción de funciones | 6
Ersa GmbH Instrucciones de uso_HF3_14_es | 30/10/2014 318 / 0