00193897-0302_AI_MTC2 BE_DE EN - 第115页

Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series Edition 07/2009 113 2.10 Assembly MTC2 2 Heavy unit: The MTC2 is very heavy . If the surface is only slight ly uneven, the MTC could topple…

100%1 / 146
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
112
2.9 Final work
after installation of the component docking unit
: Reconnect the power supply.
: Configure the "new" machine in the station editor of SIPLACE Pro
as well as under SITEST on
the station computer.
2
: Switch on the machine at the main switch.
: Dock the component trolley to the machine.
: Close the covers.
: Carry out referencing.
: Change to SITEST.
: Measure the marks on the component table.
2.9.1 Dock the component trolley
: Adjust the component trolley to the machine height.
2
Relevant information is provided in the latest operating instructions:
00193921-xx Operating instructions SIPLACE HF
00195284-xx Operating instructions X-series
2
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
113
2.10 Assembly MTC2
2
Heavy unit:
The MTC2 is very heavy. If the surface is only slight
ly uneven, the MTC could topple over and
damage other machines or crush persons. The mass inertia is significant also when pushing or
pulling. Monitor every movement so that damage/accidents are avoided. 2
2.10.1 Preparation of the MTC2 and slide-in framework
00116438-xx SIPLACE Matrix Tray Changer 2 (MTC2)
2
2
: Execute a shutdown and switch off the placement machine at the main switch.
: Open the protective cover.
: Disconnect the machine from the power supply and lock to prevent reconnection.
: Open and remove the cover over the compressed-air supply or power supply and place it out-
side the working area.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Assembly instructions MTC2 and Component docking unit on SIPLACE HF and X-series
Edition 07/2009
114
2
Attention: Heavy machine component!
2
: Organise a helper:
One person grips the MTC2 slide-in framework by the handles and the other loosens the four
bolts used for
fixing to the MTC2.
2
2
2