00197733-01_VD_605_04_DE_EN - 第11页

Station Software 60 5.04 / Version D escription Ausgabe 04/ 2015 Edition 11 Productivity lift        PCB width restricted to 216 mm with a dual conveyor and t o 460 mm with a single conveyor. Maximum perm itted co…

Station Software 605.04 / Version Description Ausgabe 04/2015 Edition

4.3 Supported Hardware Options with an Interface to the 605.04 Station Software

Feature X4 X3 X2 D1/

D1i

D2/

D2i

D3 D4/

D4i

Additional information

RF and PDA MC70 scanner

       Can be used on all X- and D-series

machines, the MTC 2 and the

SIPLACE Setup Center 3.3.

Sensor for reject bin

    Sensor for verifying that the reject bin

has been mounted correctly in order to

prevent potential head crashes

(particularly recommended if C&P20

heads are used).

2D PCB barcode reader

       "2 D Barcode" (hardware) option

required

MTC 2     For restrictions, see chapter 9

"WPC 4" waffle pack changer     For restrictions, see chapter 9

Manual tray        For restrictions, see chapter 9

Component reject conveyor        For restrictions, see chapter 9

Dip module

    Cannot be used on component

changeover tables of the X-series.

Dip module for X-tables (LDU_X)    For restrictions, see chapter 9

Coplanarity module with 3D coplanarity

sensor

  For restrictions, see chapter 9

X feeder adapter for linear feeders    For restrictions, see chapter 9

Station Software 605.04 / Version Description Ausgabe 04/2015 Edition

Productivity lift

  



   PCB width restricted to 216 mm with a

dual conveyor and to 460 mm with a

single conveyor.

Maximum permitted component height,

13 mm.

Cannot be used in combination with an

MTC2 at location 4 of an X2.

WDTL is not possible.

Vacuum tool

  



   The station software offers no

possibility to configure the type of the

vacuum tool.

Table 4-1: Supported hardware options

Station Software 605.04 / Version Description Ausgabe 04/2015 Edition

5 SITEST

SITEST Version 605.xx incorporates all the functions for testing and setting the components of the

X- and D-series machines.

NOTICE

For a detailed description of the functions of SITEST, please refer to the online help

system for SITEST.

The following changes have been made in SITEST for software version 605:

– You can set-up the conveyor widths to ensure the compatibility to the SIPLACE X4i machines.

– As a service engineer you can set the position of the fixed conveyor side user-defined in the

Options and Configurations menu. The settings apply to the conveyor, not for the track.

– In the Options – Nozzle scan options menu you can configure the nozzle scan concerning

the closeness of the nozzle scan and the behavior of the machine in case of defects.

– Second row nozzle changer supported for D4 machines (also valid for D4i machines).